• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

PS intermediate shaft rebuild in? KS

jeepbob

Basic User
City
topeka
State
ks
I have 81 with ps. Went through trying to find and replace leak. Think it is just pressure hose, but in examining found the boot at the lower intermediate steering shaft is torn loose from the bell. It has a little play in joint. Would like to rebuild but cannot find the boot at Napa, O'reilly etc. Any ideas? Napa's refurb shaft does not have it on. Am I going to have to go through Crown?
 

tower210

Scrambler Junkie
Lifetime Member
City
Olathe
State
KS
If I had the money, I'd replace the whole shaft with a borgelson or equivalent......

That lower joint was junk in 9
1982.......
 

walkerhoundvm

Just trying to stay upright
Lifetime Member
City
Cave Creek
State
AZ
The Borgeson shaft is worth the money - but do yourself a favor and paint it first.
 

jims chop shop

Scrambler Junkie
Lifetime Member
City
stafford
State
va
http://www.quadratec.com/products/918018_06.htm
04cb1a0d78f924145eb30c26c463be36-1.jpg
 

Loyalpoke

Legacy Registered User
Lifetime Member
City
Stillwater
State
ok
I need a new shaft too. If i don't have much lift and original size tires is the Crown or Omix-ada shaft sufficient and reliable? There is a big difference in the price with the borgeson. Is it worth the price difference?
 
Top