Recent content by Mwood1129

  1. M

    High crank case pressure

    Yes. I used actual vacuum line. When the engine was @ operating temp the hose would collapse and stop the vacuum. Replaced it with fuel line and no more issue.
  2. M

    Condensation on face of tach

    Yes garage kept. And a factory tach. I just know the factory tachs are getting harder to find. I may try a L.E.D bulb and see what that does . thanks for the information
  3. M

    Condensation on face of tach

    Is it normal for the tach to condensate only when the lights are on ? I do live in the southeast and the humidity is very high . It’s the only gauge that does it .
  4. M

    High crank case pressure

    No leak down. I think my vacuum line is collapsing going to the pcv valve. Gonna swap the line out tonight and see how that does
  5. M

    High crank case pressure

    Ok.. have a stock 258. Around town is fine. But when out on the highway above 1700 rpm. I’m getting oil pushed out the vent on the valve cover. The PCV valve is new. I’ve got a solid 160 psi compression on all six cylinders. Does not burn oil. Spark plugs are all very light tan in color. What...
  6. M

    I created a video on my CJ8 Rust repair let me know your thoughts

    That’s what seam sealer is for. Spot welds on the inside
  7. M

    Fender Flares

    I got a set off Amazon that fit with no issues
  8. M

    I created a video on my CJ8 Rust repair let me know your thoughts

    Same rust spots you have. Believe me you won’t regret it. And just think of all the YouTube videos you could make
  9. M

    I created a video on my CJ8 Rust repair let me know your thoughts

    Get a small mig welder and start replacing metal
  10. M

    Coming along

    I just threw them on the see how the black looked on the blue
  11. M

    Coming along

    .
  12. M

    Coming along

    It “ raptor bed liner “ I got the tint-able liner. Went to paint shop and got a quart of blue tint
  13. M

    Coming along

    4 pints on the tub.. two coats inside and out. Inside was reduced 10% and applied with HVLP gun . I didn’t want the coarse texture on the inside.
Top