sdsupilot's latest activity
-
sdsupilot replied to the thread Center-Diff 4wd systems Swapped into CJ's.Perhaps their longevity on the street is better. I have pulled/installed 4 quadra trac transfer cases in the same CJ7 in 2 years... -
You might consider a pass drop 241C case. My build has one with a JB SYE and an AA clocking ring. I have clearance with a stock D30 so...
-
Here is the end result. It has been fun driving in to town, getting lots of head turns, thumbs up and inquiries
-
Got all the parts and pieces back together. Most of the wiring is back in place, just a couple that needs heat protection not hooked up...
-
sdsupilot replied to the thread The story of Peggy's jeep..Finally getting around to working on the 60. I started fitting the bearings and oil slingers. Immediately saw than I was sent the...
-
-
sdsupilot replied to the thread Sway Bar Link mods.I think your reasoning is good. 8.5-9” should be fine. For reference mine is a BDS 4” with 3/4” shackles. My sway bar links are right...
-
-
I think the bottom side stuff is done. Up to the top now. Added the flange while I had it out. It was bear to pull it our the tube to...
-
sdsupilot reacted to don87401's post in the thread My Great Nephew got a Scrambler for Christmas with
Like.
My Great Nephew got a Scrambler for Christmas and his Mom sent me a picture. So I sent him a picture of mine. -
sdsupilot reacted to Dave The Sparky's post in the thread 82 UK Spec Laredo Scrambler Build No 2 with Like.
2 out of 3 now here, just the biggest one to go :woohoo:
-
Motor back on the mounts on the frame. Bell housing almost bolted up. Back to moving forward again.
-
After getting my A.D.D. under control. ( I started making the old dump truck into a trailer for the tractors) The roll of top material...
-
sdsupilot reacted to don87401's post in the thread Hallmark Scrambler off to the paint shop. with Like.
My very talented Niece hand painted one for me. From some pictures I sent her.
-
Still working an getting the motor ready to go back in but I was sitting at the computer last night and decide to see if I could make...
-
Had me some hogs when I started
-
sdsupilot replied to the thread The story of Peggy's jeep..I haven’t seen that before. That’s another good option, although I can’t find it for sale in smaller sizes. I will probably have to...
