Search results

  1. rispony

    Firewall Hole Measurements and Locations Needed

    Hey everyone! I have a large favor to ask as I'm a little stuck at the moment. I've searched everywhere and can't find concrete numbers regarding firewall holes. On my current build, the PO welded up almost every single hole in my firewall and I can no longer tell exactly where the holes were...
  2. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    DEI is insane! I've been working on laying all the insulation down for the scrambler and I've been using DEI Boom mat cause a friend recommended it over Dynamat. I was always a little hesitant but went with it anyways and ordered 2 10-packs for roughly ~$240z It looks similar to Dynamat in that...
  3. rispony

    Picture of factory side steps on drivers underside

    Unfortunately the pictures and diagrams I've found online don't tell you the measurements correctly for the install of the factory side steps My question, is this notched cutout in the underside intended for the rearmost bolthole in the sidestep?
  4. rispony

    General Scrambler Questions

    Figured this would be a good place to compile some questions I had. Feel free to contribute. 1. Did all scramblers come with rocker trim moldings? 2. Did all Laredo models come with the "Laredo" glove box door decal? 3. Was it possible to get both clock/tach or get a clock only or a tach only...
  5. rispony

    Can Someone ID this part?

    Midway through my restoration and I found this part that was painted in the original Deep Night Blue but I have no idea where it came from. Thoughts?
  6. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    Also getting some other stuff powdercoated gloss black, I found a guy in Shirley in Long Island, NY. If anyone needs a place in the New York area, ULTIMATE powder coating is your place. Really nice people and extremely extremely reasonable prices for top notch work. Here's a before pics of all...
  7. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    This is all I got done so far, about 6 sheets laid. Doesn't look like much but it took almost 2 hours and I like tithing of myself as a fast worker. Then the heater box breakdown, pretty boring but you get the idea PS Whoever did this diagram is a saint:
  8. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    This is where I stand now. I opted for POR-15 for the underside of the chassis. I masked off all of the drain plugs and holes on the underside of the tub and got to prepping. I bought myself a gallon of the degreaser, the metal prep, and the actual rust encapsulator. I've already sprayed the...
  9. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    Engine in with some pulleys and headers Tub on to mockup the exhaust
  10. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    Axles in Rolling Chassis Officially done Engine Dropped in
  11. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    Engine somewhat dress up Some of the parts painted All the axle components Drilled and slotted rotors
  12. rispony

    Anyone running 16" or 17" rims? Pictures would help!

    In the midst of a full rebuild and need to get wheels and tires soon. I'm doing a 4.5" lift and going with 35" tires. I was planning on going with 15" wheels but after seeing this pic I'm no longer convinced. Too much sidewall for my tastes. Anyone have 16" or 17" wheels on 35's? Pictures would...
  13. rispony

    Parking in New York City. Only in a Jeep

    Especially during winter, finding a spot is impossible. Have a collection of these that I've taken this winter, here's my favorite!
  14. rispony

    RispoNY's Scrambler Build Thread - The 'Kit' Scrambler w/ Postal Top (PIC HEAVY)

    Tub just got painted!! Pics!! Just got pictures sent to me of the tub! The color looks much much darker/bluer but he assured me that it's jus thte quality of the pictures. Does paint get lighter while drying? I'm getting very nervous regarding the color, but the tub looks great. Please someone...
  15. rispony

    HighSierra CJ's jeep pics

    Like this:
  16. rispony

    HighSierra CJ's jeep pics

    That color isn't based off of U.S. Postal trucks from the 1930's, is it? My local shop nearby, Blackstone Offroad is doing a ground up on an 8 for a customer and that's the color they chose...it looks identical. (Note: The fender flares in the pics have since been swapped out for the correct ones)
  17. rispony

    Anyone is Seattle? Buying my dream car sight unseen...

    Not much of a dream truck in that picture....how about now? More here: http://www.icon4x4.com/dr/new/Dodge-D200-1965?c=main
Top