Search results

  1. Kim Dawson

    Fuel fill hose and vent line.

    Everything I couldn't find. Best source for filler parts. You the man! Ordered what I need. Thanks.
  2. Kim Dawson

    Fuel fill hose and vent line.

    My Scrambler has the 15 gal steel tank centered in the frame. I was trying to find 1" and 3/4" fuel fill hose from a roll to connect to the filler. I'm not finding those sizes. Does anybody know of a source? If not, looks like I'll be buying the short bent ones made for the 15 gal tank and...
  3. Kim Dawson

    Someone made up indicator lights for the CJ dash other than the stock ones. My dash has one...

    Someone made up indicator lights for the CJ dash other than the stock ones. My dash has one extra spot where a "check carb" light used to be. I'm using TBI and need an indicator light for that. Are you the one who made up those lights?
  4. Kim Dawson

    Finally got another one!

    You're off to a good start. Body looks decent.
  5. Kim Dawson

    Seat colors

    Spice and honey are pretty much the same. Honey was an 85 color I believe.
  6. Kim Dawson

    Roll over check valve and liquid check valves

    Got the Delorean check valve today. Put it on. One line to canister and the other tank line to the LCV valve. There is another line coming out the back. Is that just a breather line that doesn't go anywhere?
  7. Kim Dawson

    Vacuum Canister Question

    I found a GM canister on ebay, with tank and purge ports and a vent, and it's new. It's about 100 bucks shipped. I'll take Spanks advice and order it. And like WH says, testing the old canister would be difficult. Learned a lot about the fuel vapor systems. Thanks for all your comments.
  8. Kim Dawson

    Vacuum Canister Question

    So without all the smog/PVC stuff, what do I connect the number three and four ports to?
  9. Kim Dawson

    Finally reupholstered nutmeg seats

    You might try using a hair dryer (poor boy heat gun) on the loose areas to tighten them up. Just be careful not to get it hot enough to melt it. Nice job. Or you can set them out in the hot sun.
  10. Kim Dawson

    Vacuum Canister Question

    Went to Napa today. They would have to order the canister and it would be $150 to get it. I like the simplicity of it. Considering using the Jeep canister. Repaired the nipple today. This is going on a Scrambler with a 304 with TBI and no PCV stuff. Can I use the two center ports like Spanks...
  11. Kim Dawson

    Roll over check valve and liquid check valves

    Maybe each one is the "last one".
  12. Kim Dawson

    Roll over check valve and liquid check valves

    I see the Delorean one. There are other aluminum one way roll over check valves I ordered the Delorean check valve from the Delorean Co. It said it was the last one. There are other aluminum made-in-China one way roll over check valves for cheap. Are these suitable for future projects?
  13. Kim Dawson

    Vacuum Canister Question

    I like the GM '89 Suburban canister option. Now that I understand how all this works, I'll pick one up from Napa. Thank you all.
  14. Kim Dawson

    Vacuum Canister Question

    Thanks guys. Looks like for the system to work, it needs that ported vacuum so I'll repair that broken nipple. This will be used with TBI set-up so I'll plug that carb vent nipple. Very helpful picture.
  15. Kim Dawson

    Vacuum Canister Question

    From left to right, one, two, three, four. One is plugged off on two of my CJs. Two goes to the roll-over valve. Three to vacuum at the carb. And four to some vacuum switch near the carb. Where is one supposed to go? And four goes in as far as the raised ring and stops. Is there something...
  16. Kim Dawson

    Master Cylinder & Booster for CJ

    Thanks for your replies. I see ones that look the same on Ebay for less, $164.99, which are made in China. Are all of these made in China? And are all of these the same?
  17. Kim Dawson

    Master Cylinder & Booster for CJ

    A few years ago I bought a used TJ booster & MC thinking I would use it on a CJ. I made an adapter bracket that would put it in the right position to fit the CJ pedal. This all looked very nice until I put it on the car. I can see that the booster will interfere with the hood. I see on ebay lots...
  18. Kim Dawson

    Storage options for bed of scrambler

    I mocked up rear quarter boxes for the Scrambler that fit where the Lido ones went. Mine will be out of 14 gauge metal with a lock, 9 inches at the widest point and nearly as tall as the bed side. My neighbor, that does welding, will make them up when he gets a chance. I asked him about making...
  19. Kim Dawson

    304 & 999 Scrambler Build

    Got the body on the frame. Roll bar and divider painted and in. Working on fenders, tailgate and other small parts. Happy to finally have the body inside the garage for the first time. Now that the body is in, I can use my spray area for the rest of the parts. Everything white is like a blank...
  20. Kim Dawson

    Carter Quadrajet Questions

    If Ogres isn't interested in your Q-jet, let me know.
Top