Search results

  1. rubclt

    U-joint/yoke issue?

    I read about your joint, not sure, another thought... did you check the pinion yoke, does move or leak? Could be pinion bearing causing vibration too... good luck tracking down issue
  2. rubclt

    Excited to help our veterans and wounded warriors - 4 Wheel to Heal

    Looks like a great mission, thank you
  3. rubclt

    Brackets

    Looks like sway bar mounts, you can see in this photo behind from cross member. This is photo of frame upside down. So the go on bottom of frame.
  4. rubclt

    Jeep Rubicon 392

    Hmm... Hemi, half doors... I would have to sell my Hemi CJ8
  5. rubclt

    Soft Springs OME, Pro-comp, Washboards, etc

    I have run three different springs with the same Bilstein shocks. The springs with thinner leafs ride the best in my experience. Helpfully information about leaf springs and ride quality. Good luck with selection...
  6. rubclt

    TDK Frame - Paint vs. Powdercoat? Shackle reversal? Other modifications?

    I rattle can my rustic CJ7 frame, posting for comparison
  7. rubclt

    TDK Frame - Paint vs. Powdercoat? Shackle reversal? Other modifications?

    I powder coated my TDK coil suspension. I used a color that matches a rattle can satin I use for Touchup. Painting yourself with rattle cans is $100, powder is $700... a factor to consider... I welded engine mounts to frame, something to consider depending on your engine option.
  8. rubclt

    CJ7 Caroline Build

    Cleaned, prepped, painted and installed a 20 gallon tank and skid. I used a 15 gallon strap and it is too long, cut and overlap welded.
  9. rubclt

    CJ7 Caroline Build

    Thank you, Doetsch Tech shock set from Rocky Road. Brake line Omix kit. https://www.quadratec.com/products/916737_44_07.htm
  10. rubclt

    CJ7 Caroline Build

    Starting brake lines
  11. rubclt

    CJ7 Caroline Build

    Rolling, more parts to add to a clean foundation. Before and after photos
  12. rubclt

    CJ7 Caroline Build

    Rolling chassis again... drop drive train in, finish tub and marry the two again
  13. rubclt

    CJ7 Caroline Build

    Cleaning grease off axles, this Gunk Gel did the job
  14. rubclt

    CJ7 Caroline Build

    Rear frame cross member was bent from wreck, had a trailer hitch welded so we cut off and installed new one...
  15. rubclt

    What's on your Work Bench?

    Cleaning bolts for engine mounts and suspension
  16. rubclt

    1984 Scrambler Preservation of “Rose”

    Took the 2.5” lift off and went with Crown Stock Springs
  17. rubclt

    CJ7 Caroline Build

    Thanks, it all in prep as they say... It’s little pits, seems solid... shadow in photo makes it look worse...
  18. rubclt

    1984 Scrambler Preservation of “Rose”

    Rose needed a little something and I found a set of light covers to finish off the front
  19. rubclt

    CJ7 Caroline Build

    Frame Rattle Can Overhaul and ready for new suspension/engine... will require a few Touchup’s when suspension is swap.
  20. rubclt

    CJ7 Caroline Build

    Pressure wash, degreased and rust converter applied... tomorrow more sanding and paint
Top