Search results

  1. B

    torque arm and stud questions

    Thank you again Dave! I appreciate all the input. Chris
  2. B

    torque arm and stud questions

    Thank you Dave. That's pretty much how I had it figured, BUT in a few different illustrations I have found there is something called a push washer between the stud and the skid plate. I could be way wrong, but that's how it looks and I don't have a clue what that is. My plan is to move forward...
  3. B

    torque arm and stud questions

    I now have a torque arm and stud in my possession. As my jeep had none of this and I've never worked with stock running gear before, I have little more than an idea on how to make all this work. I have asked the googles with less than satisfying responses. The new stud came with bushings and...
  4. B

    transmission mount doesn't line up

    It's all dealt with I think. Thank you all for the help. Thank you Randy for your generous freebie offer also. I appreciate that. Chris
  5. B

    transmission mount doesn't line up

    Upon further reading, I am in need of a torque arm assembly if anyone knows of or has one laying around, I'll buy it. Chris
  6. B

    transmission mount doesn't line up

    A little research has shown me there should be some sort of torque arm involved here. I have nothing of the sort.
  7. B

    transmission mount doesn't line up

    I found my transmission mount to be in two pieces. It was only bolted to the right hole of the mount and the left hole in the skid plate. I put in a new mount. Now my bolt holes on my mount to plate are about 2 inches off left to right. Any ideas? I am all ears. Thank you Chris
  8. B

    hydraulic clutch conversion?

    I appreciate the responses fellas. Chris
  9. B

    hydraulic clutch conversion?

    Sweet! I would love your honest opinion on how well the 5.3 runs, especially at low rpms, compared to a good running inline six. Chris
  10. B

    hydraulic clutch conversion?

    What drivetrain combo are you running? Chris
  11. B

    hydraulic clutch conversion?

    I thought the master cylinder went through the knockout spot just to the passenger side of the electrical bulkhead. Yours is below? Chris
  12. B

    hydraulic clutch conversion?

    That is a sweet looking setup you have there. Thank you very much for sharing. If I stay mechanical, that is clearly the way. Chris
  13. B

    hydraulic clutch conversion?

    Thank you. I would be very interested in pictures if you want to. Chris
  14. B

    hydraulic clutch conversion?

    That's not good to hear. I thought the bulkhead was supposed to be the same on the painless harness. I am planning a full painless harness replacement this winter. Any pictures or measurements of this issue? Chris
  15. B

    hydraulic clutch conversion?

    I would think the mechanical clutch setup would require more bracing than a hydraulic setup. Chris
  16. B

    hydraulic clutch conversion?

    I'd be in for grabbing one from a junk yard, but I live where there are none. How much difference is there in the two pedals? I could always buy one and have it shipped. Chris
  17. B

    hydraulic clutch conversion?

    Are you using the factory clutch master cylinder location? If so, would you be willing to take a picture of that area? Chris
Top