• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. B

    Scrambler tub length ?

    ?Had some 3/16" 2x3" tube so I made a patch for both sides. Here's the patch in place before grinding the welds down. I see there are some rear shock mounts that weld to the top of the frame and don't trap dirt. Think I will go with those for an extra 20 bucks over the stock style.
  2. B

    Scrambler tub length ?

    Here's the inside of frame, looks like the it was dipped in a tank of some kind of paint with the way the interior side appears.
  3. B

    Scrambler tub length ?

    Been working on it on and off as weather and circumstances allow. Body and floor are about 80% complete. Today I cut off the rear shock mounts and found holes in the frame under the rust. Surprisingly the inside of the frame looked relatively pristine but for the holes rusted through.
  4. B

    Scrambler tub length ?

    Drivers side sheet metal tacked in.
  5. B

    Scrambler tub length ?

    The frame extension is done. Waiting on 4 new main eye spring hangers as the original ones had wallowed out holes in them. Tacked the original spring hangers in place so I could set the tub halves on it. The bottom of the seam is 113 5/8". The top is a quarter inch closer but I don't...
  6. B

    Scrambler tub length ?

    So, been awhile since I worker on it, got around today to finishing the welds to locate the frame. Due to wind Iwill have to move the car and bikes out of the garage to complete the welding. After I do that I am going to throw the 2 halves of the tub back on and clamp them together with some...
  7. B

    Scrambler tub length ?

    Photo shopped scrambler looks pretty cool. Thats what I am looking for in a finished product. The wheelbase should be around 117", which is close to the Jk/Jl 4 doors.
  8. B

    Scrambler tub length ?

    That's what I am aiming for, found this photo on the net, I think this is what it will be like. This one looks like they cut the hood and high lined the fenders.
  9. B

    Scrambler tub length ?

    Thank you ag4ever, I appreciate it. And to Barry's it has Chevy 3/4 ton axles with a L98 TPI 350 and dana 300 twin sticked. Here's the yj on trip to Moab from years ago.
  10. B

    Scrambler tub length ?

    Hello all, new to the forum. I am starting a project and if any of you can help I'd appreciate it. I have started a stretch YJ project and I am looking for the measurement of the Scrambler tub between the front fender/tub joint and the rear seam on the side of the body where the tail light...
Top