• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. S

    360 carb options

    what is a good carb for the 360? I have a 2150 but i believe it is too small with the 1.08 venturi size. I've been reading and most say that i need from 400 to 550 cfm. if anyone can give me some insight i'd appreciate it. thanks
  2. S

    axle question

    i am guessing these are both narrow track. and i'm going to ask, without having to swap in a wide track front end any chance of getting 35's on here so they don't rub? i have 33x12.5x15's and they hit the springs when turned all the way.
  3. S

    axle question

    figured it out dana 30 front dana 44 rear. front measured 53in. rear measured 49in.
  4. S

    AMC 360

    okay motor heads, started it up today. idle at 750-800 timing was at 0. took up to 2500 timing was at 10-12. hooked up vacuum advance took it up to 2500 timing was 40. does all that sound okay. still have the issue of my vacuum advance being in the way of power steering belt.
  5. S

    axle question

    where should i measure to see if i have wide or narrow track and what should those be? i have dana 44 front and rear.
  6. S

    AMC 360

  7. S

    AMC 360

    wrong pic in last post, here is right one. but, can anyone tell me what this tab on the t-case is for.
  8. S

    AMC 360

    ran across another issue. power steering belt runs into vacuum of distributor.
  9. S

    AMC 360

    after i read that last post, i had a thought. this might be the one out of my cj7. title says its an 82, but everything about it says older. i think it's a 78, only because it still has the glass fuse block, and it had the 304 three speed combo. but whatever, i made it work, drill some new holes...
  10. S

    AMC 360

    in this pics it is sitting in frame backwards just to hold up tranny for now.
  11. S

    AMC 360

    this is the skid plate i have
  12. S

    AMC 360

    after looking at you write up, the skid plate i have and you have look different. plus the fact that the only place it looks like i could put a mount is on my transfercase adapter. there isn't anything on the tranny. also i was wondering if you kept notes as to what slave cylinder and master...
  13. S

    AMC 360

    i have the 360 and tranny mounted in jeep, tranny is ford t-18, stock skid plate won't work. any suggestions.
  14. S

    AMC 360

    guess i should have mentioned what final set should be. amc 360, ford t 18, with dana t 18 transcase. hei, 2150 carb, headers. dana 44's front and rear, 4.27 gears. i think they have lockrite lockers right now want to change rear to something better.
  15. S

    AMC 360

    trying to find a starter. preferably with solenoid on it instead of external. i hate extra wiring. any thoughts?
  16. S

    AMC 360

    is anyone running a 360? i have one out of 79 wagoneer that won't have any emission stuff on it. would like to talk to someone who might have done this and could tell me about some things. thanks in advance for any help.
  17. S

    Brackets

    thanks for help guys
  18. S

    Brackets

    I took these brackets off my old scrambler frame to put onto the new frame but I forgot where they came from or what they are for can someone help me please?
  19. S

    Steering shaft

    What is the best way to take the steering shaft apart? And I am talking about the shaft itself not off of the column the d bar. I drilled the rivet out but it doesn't want to budge. Thanks
  20. S

    Springs

    The sawzall trick is probably what I was going to try anyway. Thanks
Top