• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. G

    ISO PICTURE OF OEM BULKHEAD TO BODY SEAL

    thanks Adam for the pics also. Im surprised no one has remade one. Looks like yours held up well. Going show pics to a local shop. See what they can match up.
  2. G

    ISO PICTURE OF OEM BULKHEAD TO BODY SEAL

    Hey Adam sorry just saw your post about the seal. Yes please takes some pics when you get time.
  3. G

    ISO PICTURE OF OEM BULKHEAD TO BODY SEAL

    thanks onesourcemike for the pics. Does it roll up on the inside like it does on the bed side?
  4. G

    ISO PICTURE OF OEM BULKHEAD TO BODY SEAL

    Im actually looking for a picture of the oem seal. Even just a piece of one. Just wondering what it use to look like. Surly a member here has a oem seal even in bad condition. Thanks for your time either way.
  5. G

    ISO PICTURE OF OEM BULKHEAD TO BODY SEAL

    Does anyone have a picture of a oem bulkhead to body seal? Seen a few far away pics of them mounted. Never a close up. Thanks Gary
  6. G

    Does anyone have bestop dualmatic cj7 installtion instructions?

    Looking for install instructions for a bestop Dual Matic for a CJ7. Bestop is closed till Monday. Hoping to get it fitted before then. I have the original frame. However Im removing a Whitco frame. Looks like the hoop brackets are too far back. Thanks in advance.
  7. G

    replacement torx bolts

    Has anyone else used the crown replacement torx bolts? I purchased a set of zinc plated torx bolts. They look nice. However the beveled parts seem thicker. Not allowing the bolt to sit flush. I still need to paint the bolts thinking it my look worse once thats done. Should I try to...
  8. G

    rear tub bracket brace next to tail gate painted or not

    Wondering if the bracket brace next to the tail gate is painted the same color as tub or just painted black. Thanks in advance Gary
  9. G

    Nos tach will not rev over 800 rpm tach repair shop????

    Purchased a NOS tach a year ago. Finally finished jeep installed tach. My surprise it works however will not rev over 800 rpms. Now I mean the tach not the engine. IM guess something internal is not right. Proberly a warrent swap out back in the day. Has anyone used any of the tach...
  10. G

    Ignition control module keeps going bad need help

    Long story short. FRame off restoration on my 83 with 258 straight 6. Jeeps been down for year and half. Nothing on the engine was unplugged. Just removed from the firewall and fenders. Every thing put back together tried to crank. It will turn over but not fire. The ICM had smoked a hole...
  11. G

    Nutmeg hardtop factory color paint code

    Does anyone have the factory paint code number for the nutmeg hardtop? Also what kind of paint to buy? Thanks
  12. G

    Whitco soft top frame for soft doors

    A friend is selling his few remaining cj8 parts since he sold the 8. The Whitco soft top frame is complete minus the black plastic caps. It is used with the full soft doors. Not sure if the doors frame are there. He is asking $100 plus shipping Thanks respond here or ksmartin828@gmail.com
  13. G

    Marchal fog light harness question

    I need to run my oem marchal fog light harness. Of course I have already installed my front oem bumper and winch w/ bracket. If I remember correctly It does run down the back side of the bumper held by clips. Will I need to remove the bumper to install? It will not fit between the bumper and...
  14. G

    Single stage paint or base coat clear coat

    My body guy ask me if I wanted single stage or base coat clear coat paint. I have 83 CJ7 Laredo. First I would like to know what it came from the factory. Next I would like to know the pros and cons to either one. He will be using PPG paint if it matters. Thanks in advance for yalls help. Gary
  15. G

    lower steering shaft boot replace question?

    I need to replace the lower boot on the steering shaft. I removed the bell and old boot. TRied to slide the new boot over the top pin. It seems it going to tear the new boot. My question is does the end of the shaft come off? Or does the pin at the end slide out? I really dont want to mess...
  16. G

    original white rear bumper cj 8????

    Does anyone know of a rearcj 8 step bumperin white not chrome? The guy selling has the plastic end caps says its original. Just wondering befor purchase
  17. G

    oem cj8 hardtop glass dimensions

    I need the oem jeep cj8 hardtop glass lenght and width. Also looking for the side glass. Any helpwith be great. Thanks
  18. G

    t5 shifter removal

    Is there a easy way to remove the shifter from a T5 transmission in the jeep. I dont want to push against the tub or the transmission. Thanks
  19. G

    help need pics rochester varajet II installed on 4 cyl iron duke

    REplacing my WEber with the factory Rochester on my 81 cj8. Wondering where to hook up some of the vaccuum hoses and electrical wires. I dont mind capping some vaccuum hoses if I can. I dont have emissions onthe jeep. Any pics or help with be great. Thanks
  20. G

    Adding power barakes to 81 w/ironduke please help

    Im adding power brakes to my 81 cj8 w.ironduke 4 cyl. Where do I run the vacuum hose for the booster. I didnt see any blamks in the intake. Was power brakes ever installed for a 4 cyl. Thanks for yalls help.
Top