Search results

  1. certifiablejeep

    SJScrambler - Getting Started

    Trying some things out by re-purposing what I have. I cut slits in the raised portion of the bed to allow the tailgate piece to sit down flush to the bed... it is a tight fit and this way it won't walk around, rattle or rub... cb
  2. certifiablejeep

    SJScrambler - Getting Started

    so, in the spirit of reuse, was looking to get some tie downs in the bed as there really isn't a great setup for that. I will add some points to the base of the roll bar lets, but having something I can screw in with eye bolts or something would be nice. By using the CJ7 bed the way I did...
  3. certifiablejeep

    SJScrambler - Getting Started

    Playing around last night with the spare panel I had... trying to see if this will work for what I want it to do... so far it seems OK... aesthetically though it is a bit off... has the lines all lining up, but the gap plays with my eyes and although it appears stock-ish, one piece would have...
  4. certifiablejeep

    SJScrambler - Getting Started

    Yes, I will have to... I can get them close, but there will still be a space. The whole bed will get it done when that time comes. cb
  5. certifiablejeep

    SJScrambler - Getting Started

    As of right now it is more than likely a bright color... yellow/orange/red. The Scrambler (other one) will be Olympic white with garnet interior. This one I am thinking Yellow... possibly Red, but custom graphics that are similar to this cb
  6. certifiablejeep

    Been a while since we had a Beer thread...

    BOOM SAUCE!!!
  7. certifiablejeep

    SJScrambler - Getting Started

    Got a little time to do it... made some tweaks as commented on here and was able to get 2 panels done and they fit reasonably well... I am not looking for perfection as there are some curves that are hard to get around, but want to get them close so they can be welded in and then seam sealed a...
  8. certifiablejeep

    Spankrjs 1985 Spring Special CJ-7

    very pretty... always loved the look of the piping on the seats and overall color combo. cb
  9. certifiablejeep

    What's on your Work Bench?

    How did you get your Jeep on your workbench? cb
  10. certifiablejeep

    SJScrambler - Getting Started

    It's on the list, but I still don't have the justification yet for it... this is the first real need. cb
  11. certifiablejeep

    SJScrambler - Getting Started

    That's the problem with being an OCD perfectionist engineer... trying to figure out where I went wrong ;) cb
  12. certifiablejeep

    SJScrambler - Getting Started

    I will be checking that tomorrow... thanks for the tip... there might just be enough wiggle room. I was playing around with it late yesterday afternoon and we were headed out to eat, so I had to get in and get cleaned up. cb
  13. certifiablejeep

    SJScrambler - Getting Started

    Fun with arts and crafts last night... need to make some panels and want to use what I have... we will see if we can make this work. and to see if side to side were exact or not, I flipped it and moved it to the other side... it is very very close... I estimate 1/16" off front to back...
  14. certifiablejeep

    SJScrambler - Getting Started

    I picked up another 1/2 parts Jeep that has kept me busy and Jersey visited for the Superbowl, so there wasn't much work going on. Put I am somewhat back on track... got a lot more braced up and ready for flooring hopefully this week... we will see, weather has been interesting to say the least...
  15. certifiablejeep

    Just for the heck of it.

    Looks good! you are welcome. cb
  16. certifiablejeep

    What's on your Work Bench?

    Work bench
  17. certifiablejeep

    Salt - when is the road safe?

    Nov 1st to May 1st normally they are tucked away... it is a bummer, but it is how they continue to survive. cb
  18. certifiablejeep

    SJScrambler - Getting Started

    Back to it... got everything moved back into place... series of frogger moves. cb
  19. certifiablejeep

    SJScrambler - Getting Started

    Finally warmed up a bit last night to work with the garage open for a bit... helps out a lot with the smoke from cutting. cb
  20. certifiablejeep

    What's on your Work Bench?

    COLE!!!!
Top