- City
- Cobourg, Ontario, Cana
- State
- da
Been working on my new project for a few months now..
the build up is going to be this..
CJ-8 tub (full length)
TDK frame
then once the tub, body, cage, and wiring is done i'm going to swap over the drivetrain and stuff from my CJ-7 onto the CJ-8 chassis.. which is....
4.2L/4.0L MPFI engine
T-18 trans with 6.35:1 1st
stock D300
HPD60s front and rear.
i'm planning on eventually running 40s..
this Jeep will be a driver, not truck or trailer to pull it...
plan on having it ready for 2010. will be driving to Moab with it...
heres what i started with...
sand blasting is fun!!!
its not going to be showroom by any means cuz i plan on beating the snot out of her when shes done!!
the build up is going to be this..
CJ-8 tub (full length)
TDK frame
then once the tub, body, cage, and wiring is done i'm going to swap over the drivetrain and stuff from my CJ-7 onto the CJ-8 chassis.. which is....
4.2L/4.0L MPFI engine
T-18 trans with 6.35:1 1st
stock D300
HPD60s front and rear.
i'm planning on eventually running 40s..
this Jeep will be a driver, not truck or trailer to pull it...
plan on having it ready for 2010. will be driving to Moab with it...
heres what i started with...
sand blasting is fun!!!
its not going to be showroom by any means cuz i plan on beating the snot out of her when shes done!!
Last edited: