• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Show me Your Bump Stops

Rosco1974

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
West Haven
State
UT
I am relooking @ my steering and want to know what you are using for bump stops. I need a total of 4.75-5". The factorys are 1.75", so either an extended frame mount or axle mount/frame mount combo.
 

Jeeper_4_Life

Scrambler Rookie
BENEFACTOR
Gold Member
Lifetime Member
SOA Member
City
Kingman
State
Ks
This is on a soa full width. May not help you. I made spacers between the stop and spring plate to adjust as needed.
 

Attachments

  • 4DB69D43-4BAE-4BC9-9675-2B57CAA66BB7.jpeg
    4DB69D43-4BAE-4BC9-9675-2B57CAA66BB7.jpeg
    122.3 KB · Views: 39
  • B2DA485E-120E-4841-B9E8-5A6A553EB9A1.jpeg
    B2DA485E-120E-4841-B9E8-5A6A553EB9A1.jpeg
    133.9 KB · Views: 38
  • B1A986FB-A58E-41B9-A33B-DE9C95E00081.jpeg
    B1A986FB-A58E-41B9-A33B-DE9C95E00081.jpeg
    115.3 KB · Views: 37

Rosco1974

Scrambler Junkie
BENEFACTOR
Gold Member
Lifetime Member
City
West Haven
State
UT
I am SUA, but everything helps. What's the measurement between @ rest?
 

Jeeper_4_Life

Scrambler Rookie
BENEFACTOR
Gold Member
Lifetime Member
SOA Member
City
Kingman
State
Ks
I am SUA, but everything helps. What's the measurement between @ rest?
Front is around 3” and rear is 4-5”. Bumps can compress about 1.25” made of rubber. I think they are energy suspension. 4-5” bump stop.
 
Top