• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Recent content by leeherron

  1. leeherron

    Dana 30 - Ball / U Joints

    So I'm rebulding / refreshening my front Dana (see below ..) and and starting to shop for parts .. thinking the MOOG Ball Joints unless you guys suggest something else .. and so far, nothing other than spicer u-joints - any other suggestions?
  2. leeherron

    Dana 30 Axle Seals

    So I'm rebuilding my Dana 30 front diff and I am trying to track down this seal on the short shaft just before the joint (see pics) - anyone know what these are called and where I might source their replacements? ..
  3. leeherron

    AMC 20 - Axle Bearings / Seals

    The FSM states "the left side." I assume you'd only have the centering block (thrust block?) removed with the chunk? I wasn't sure the circumstances where the centering block would not be present at this point of reassembly. Nicely written .. from what I've found, this is exactly the...
  4. leeherron

    AC Condenser

    For the record, it appears that no one is offering an actual replacement for the CJ A/C condenser - a universal seems to be the only solution, for which brackets must be fabricated.
  5. leeherron

    AMC 20 - Axle Bearings / Seals

    It is all taken apart, was asking about the shims .. I have confirmed that the shims go between the flange and the backing plate, but hadn't found the technique for defining how many ..
  6. leeherron

    AMC 20 - Axle Bearings / Seals

    Wow .. this must be a tough topic.
  7. leeherron

    AMC 20 - Axle Bearings / Seals

    Okay, so I've removed the axles from my AMC 20, and am about to put it all back together - these are two piece axles, and my brake backing plate will not allow the inner bearing to pass though. As I understand it, the order of the parts is the following: Inner seal > Axle with bearing pressed...
  8. leeherron

    2.5" Old Man Emu Lift Kit...Light, Medium, or Heavy Load??

    Mine will have the option for the full hardtop, and a 8274 on front so heavy is what I'll be going with .. you can eliminate that so you're down to Light or Medium .. the springs are made for a shorter Jeep, which means yours is slightly heavier .. I'd think the Medium would be the choice.
  9. leeherron

    AC Condenser

    Anyone know where to source a new one of these? (81 CJ8 AC condenser)
  10. leeherron

    Dana 300 Shift Lever Pivot Bushings

    If you look at item #37 in the first diagram, you see what looks like a rubber fitting for the end of the shift rod and the slider foot (whatever it's called) .. is that what this part is...
  11. leeherron

    Dana 300 Shift Lever Pivot Bushings

    A better view .. it took me forever to find out what these things were called, and just as long to find a clear diagram illustrating them - so wanted to update this post for those that may be looking for these in the future. Part # 12 The ebay source may dry up in the future, so I wanted to...
  12. leeherron

    Dana 300 Shift Lever Pivot Bushings

    Anyone know where I might source these bushings? I can't seem to find them anywhere. Item #34
  13. leeherron

    Steering Wheel

    Yeah, thinking about it .. kind of liked the old school feel of it before I tore my CJ down .. my wheel is cracked, so it will get replaced .. just not sure with what at this time.
  14. leeherron

    Steering Wheel

    What style wheel is this called? Came from my 1981 Scrambler, but I haven't been able to search for it consistently.
Back
Top