Recent content by Rmhavema

I have a set I can part with. Send me a PM.

Yes, the pins all lined up with the inserts in the door. Although, I realized that these frames are missing the flat piece of metal that pushes the lower TJ seal down on the door. So, the lower seal is not really tight against the door. There is probably a 1/8” gap in some areas where the...

I decided to install the half doors with the hard top this summer and thought it would be good to have some soft uppers. I was going to modify the tj half door uppers to work with the yj doors by cutting and welding the metal frame posts, but lucked out. I bought a set of these tj upper steel...

The previous owner took out the fixed windows and installed vent windows, but the outer door skins were sagging and showing a gap to the vent window seal because of the missing support channel. I welded in a couple of U channels and re-installed the windows with all new seals. Everything is...

Finally getting around to provide some updates... I am eventually hoping to get duke out on the trails and wanted a place for storing spares and tools. Last winter I found this old Tuffy lock box on craigslist. After cleaning it up and adding some tie down points inside, I painted it and...

Thanks for posting this. I had ordered some a while back but have not installed yet. It appears that I mistakenly ordered a set for a CJ7. Don't trust amazon.com when it says, "yes, this will fit your 1982 Jeep Scrambler". I will be ordering a set from MTS as well....

So, I guess it's been a while.... I bought a Warn 8274 from Rosco1974 a while back and promised I would post some pictures once I got it installed. Well, it has been on the Jeep for a year now, but here it is. He gave me a great deal and even had all the parts cleaned before shipping. I...

:headbang: sweet!

:bacon:I fixed it! Ended up being a bad aftermarket coil. I took it off and installed an old original coil from some parts I got from jeeperdd. It runs great now! :bacon:

Thats what I am thinking too. I will take a closer look at the distributor, check timing, and test the vacuum lines for proper function. :shrug:

Last year the iron duke was running great. I parked it for the winter and did a bunch of suspension/driveline updates. I have taken it for a few test drives recently and the iron duke seems to be running a little off. My issue is that at lower rpm, the engine seems to bog down and feels low...