• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. hefavitzen

    Spark Plug Reach

    Hey guys, so I am rebuilding my heads and when I was putting one of them back together I was testing whether the valves were closing completely where I put the spark plugs in the head for the test. As I was eyeballing the valve fit I realized my spark plug electrodes were wwwaaaaayyyyyy up...
  2. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    I was getting pinging. To be honest, I've only recently learned how to correctly set timing and that coupled with a distributor that was against the firewall with the engine off and likely really being pressed on when the engine is under load, my timing in the past was probably terrible. So...
  3. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    So I've pulled the head off and am looking at the valves and going to replace the valve seals and keepers along with cleaning up the valve seats. Upon inspection of the #8 valve I noticed that it is very pitted on the sealing surface. I am cleaning it up, but it looks like I may need to...
  4. hefavitzen

    Ignition Misfire Diagnostics

    Your Right! I have totally been searching for black INTAKE valves!!! ugh. Thanks for catching that!!!! I'll look for black exhaust valves!!!
  5. hefavitzen

    Ignition Misfire Diagnostics

    Ok, so I installed new intake gaskets and a new distributor that doesn't bang into the firewall and I still have a misfire issue on cylinder #8. So, I have pulled the head off to see what is what. Questions for anyone: 1) Cylinder 2 is very wet looking as is a tiny bit of Cylinder 8 (see the...
  6. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    So, after taking it out for a few drives and seeing how it feels hot and cold, going easy and scooting down the road I still feel it is missing. Not all the time, but a lot of the time, especially after driving a bit, stopping and idling, and then getting underway again (like driving to my...
  7. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    Here is how to determine if your Dakota Digital or likely any 100psi 3-prong oil pressure sensor is bad. I contacted Dakota Digital tech support and here is what they said: It is a 5 volt sensor between the red and black wire, the white wire is the voltage return. 0 psi it should return about...
  8. hefavitzen

    Speedhut Oil Pressure Switch

    Here is how to determine if your Dakota Digital or likely any 100psi 3-prong oil pressure sensor is bad. I contacted Dakota Digital tech support and here is what they said: It is a 5 volt sensor between the red and black wire, the white wire is the voltage return. 0 psi it should return about...
  9. hefavitzen

    Speedhut Oil Pressure Switch

    You are not crazy, I am just not very good with a multi meter. I did attempt to check resistance and I don't trust my outcome at all. Call this the price of inexperience and I'll learn from this go around. As for the lifetime warranty, I didn't even think of that! I'll look into it. Thanks...
  10. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    Update as of 5/22/2023 1) I got it all buttoned up but DID NOT check the oil / oil level 2) I set the timing and find that with the new distributor, it is VERY precise, meaning that a tiny turn makes a big difference. I set timing for 32 degrees, with a blue and silver spring (but not the...
  11. hefavitzen

    Speedhut Oil Pressure Switch

    Hey guys, I think I have blown out my oil pressure switch that came with my Speedhut gauges. In my efforts to find a replacement I had to turn to the Internet as neither O'Reillys and Advanced Auto were able to figure out where this thing came from. But, here is what I believe the actual...
  12. hefavitzen

    Giving it a Jolt

    This is SUPER impressive! I watched your Youtubes and even my wife was curious. AWESOME!!!!!!
  13. hefavitzen

    Gen 1 SBC with Vortec Head Coolant Bypass

    Has anyone had experience with the need to run a coolant bypass on SBC swaps when using Vortec heads? Vortec heads have coolant passages both front and rear where as Gen 1 SBC's have only a front passage in many of the intake manifolds, even ones for Vortec heads. Due to this, I am reading a...
  14. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    Andy Zuber, a friend who has helped me a lot with advise over the years and has done some excellent work on my Scrambler, correcting things I screwed up such as putting in a new wiring harness correctly. He has worked on 4x4's and Jeeps for many years and a few years ago he had begun working...
  15. hefavitzen

    Giving it a Jolt

    I have a set of Skyjacker front and rear springs that are probably only a 1 or 1.5 inch lift. I have a pair of stock spring shackle hangers too that are brand new, that I am not using.
  16. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    It did at first, then I turned the distro counter clockwise (from left to right) a bit and it stopped doing it so badly. It just isn't smooth. Even my wife, who couldn't give a flying rat about cars in general, thought it sounded not as well as she expected it to. I have the water neck off...
  17. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    Well, I got it back together and have struggled with getting the timing dialed in. The distance I can turn the distributor and have it run "ok" is tiny. Even timed at 32 to 34 degrees advanced it still wants to spit and pop a bit. I did not get to drive it as I need to reseal the water neck...
  18. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    I did recurve it with a blue spring and a lighter silver spring. I think it should fully advance by 3200 rpm. I need to get a coil wire, a new bit for my rivet nut driver that I broke, and wire power to the new distro. Then I'll set timing and hope it holds the gasket for a good long time.
  19. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    I figured it out. I put a big screw driver down the distributor hole, lined the oil pump slot up with the #5 cylinder and the distributor dropped right in pointed directly at cylinder #1. Cool!
  20. hefavitzen

    Butters - Jeff's 81 Scrambler Build Thread

    Hey Guys, so here is the latest issue I am facing: My distributor, at TDC, is pointing at #2 instead of #1. I verified that I am at TDC by checking that both valves are closed and the piston is at the top of the cylinder with a borescope. I could visually see that it is at the top of the...
Back
Top