Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Testing continues
Once we wiped all the sweat off and were satisfied eveything cleared as originally designed, we moved to test the other side.
I originally purchased 16" FOX Emulsion coil over shocks but they are too long. So, I am searching for 14" FOX Emulsion coil over shocks in...
Testing our progress
So Mark and I have been making a lot of progress. We got the 3-link all setup, Panhard bar, Hydro assist, Steering, coil overs, and shock hoops in place. Still to come is the sway bar, bump stops, and limiting straps. With the Jeep resting on the shocks and one of two...
Cont...
We also got the motor mounted to the frame (bracing to frame and motor mounts to come)
We built a custom transmission mount that will later be incorporated into the skid plate
I purchased a STAK T-case heavy duty mount but due to my low clearance skid plate it was not going to...
Progress continues
Mark and I have been steadily working on the build. Here is our progress...
We built our own Steering box bracket. We took our friends Big Daddy steering bracket as a template and then made it the only way we know how... "overkill".
Here is a shot of my plate to protect...
update on front frame work
Now that the jeep is back from getting a new cage, Mark and I got back to it.
Due to significant frame dabe it was decided to cut the frame off further back then originally planned.
Oops where did it all go?
Here it is. Anyone looking for a wide track dana 30 with...
Rock Sliders
The Rock sliders were custom made. I had sold my previous custom sliders to another Scrambler member due to the extension of my wheel base. The tubes are 1 3/4" tubing (same as roll cage). The tubes were custom bent to my provided design by Wayne from Cactus Custom Metals. They...
Scrambler and cage are home
Wayne and Eric from Catus Custom Metals worked really hard to wrap up the Roll cage. Brought the cage home to add speaker enclosures and finalize seats and center console before sending it off for powder coating. I wanted to go with black for ease of upkeep, but I...
Roll Cage underway
Great advice. I will look into the MSD Distrubuter.
Due to scheduling conflicts, :crazy:I decided to push the roll cage build ahead of the front 3-link suspension build for the moment. The cage is being built by Cactus Custom Metals and here is the progress so far. Overall...
Excellent
Thanks for the motivation and advice. I plan on going FI some day but I will definitely concider the upgrade for the time being as I feel I will need it once I'm done. :thumbsup:
Forward Progress
Mark and I got the driver floor board and firewall replaced. We had to push the body out. We straightened out the bottom body mount "L" support and spot welded it back in place. We removed the cheesy OEM nuts and we replaced them with 3/16 strap welded in place and we drilled...
Switching gears
Changing the pace a little we decided to mock up the STAK transfer case, clocked in order to have a semi flat skidplate and tranni mount.
We were forced to cut the floor board to make room for the clocked Transfer Case.
Due to the longer width of the T-Case we opted to cut...
Rear inner fenders still ava
The inner fenders are still ava if you have not found another solution for you.
Thanks for the kudos. Spent the night ordering more stuff and tomorrow is another Jeep day. :crazy:
Mando
July is here
I was not happy with the way the front TNT fenders looked after further review. They seemed to be crooked and pointing outwards towards the front and they did not line up with the rear fender flares. I purchased the Scrambler totalled a few years back and tweaked it best I could to...
Body work Progress
We managed to make some good progresss on the rear body tub. The Driver side inner fender is done and the passenger rear fender is about 90% done. The box break we made worked out perfectly.
We also managed to install the coils and it is now sitting on it's own again. With...
Rear Fenders
Well due to moving my axle towards the rear, the stock "rounded" CJ8 inner wheel wells would not work. My thought was to use the CJ7/5 style inner wheel wells would work and they would. However, I noticed that with my wheels being so far out (due to full width) I was able to gain...
progress continues
Well Mark and I busted butt all day today getting the box break completed so we can get going on the body work. We got all our bends done for the driver side and Mark tack welded it in place for now.
Box Break in action
Purchased all the metal for the box break we are building. Mark and I got 80% of it completed and we tested it out on the box for the coil overs. Tomorrow we'll wrap up the box break and I'll share photos of it completed. We'll also get started on the rest of the inner wheel...
Today's update
So the blank 3/16" Rear crush corners finally arrived and the rear of the Jeep is starting to take shape. I was not content with the flimsy 18 gauge steel fender flares. So, I cut the plate out and Mark welded a 3/16 plate. We managed to get the gas cover/neck mocked up. The gas...
Feedback
Thnx for the feedback. The internal fuel line is fixed and has worked in Mark's Jeep for 4 years with the same setup with no problems. Don't think it will be a problem.:shrug:
build continued
Things are starting to pick up. Here are a few more pics of some recent progress.
Here is the tank back from Cactus Metals.
The pick up Fuel fitting and Fuel Return fitting.
Wayne from Cactus Metals cut off the original fittings on top of the tank and added a plate. Those...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.