• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. leeherron

    What top ..

    .. is this, and is something like it still available? By like this, I mean, full length with roll up sides.
  2. leeherron

    Dash Mod: Hmm .. not sure

    The unit that you see (the display) is part of Kenwood's KOS-300 (Link) which is supposed to be used with a factory radio, but what I plan on doing is having a Kenwood CD receiver in the console like normal, but have the KOS-300's output connected to the CD receiver's AUX input .. and have a...
  3. leeherron

    Dash Mod: Hmm .. not sure

    Okay .. so I didn't want the stereo in the dash .. at least not the normal solution, was thinking the tuffy metal console with the stereo in it .. but while driving I find I want a way to see what I'm listening to .. name of the song, etc; so I thought I'd try this little device by Kenwood...
  4. leeherron

    Decal vs. Paint

    That's the question .. when placing the "Scrambler" on the hood of your newly restored CJ-8, do you use the stick-on decal, or have it painted on .. .. and if you use the decal, do you spray on a clear-coat?
  5. leeherron

    Frame Finish

    Okay .. so the frame is about ready to finish. The frame had little surface rust and original paint that survives a knotted Wire wheel. I've looked at POR-15 and Chassis Saver, and they make sense .. both *should* probably have an overcoat for UV protection - to keep it nice I'm guessing. I've...
  6. leeherron

    Engine Stand

    Full thread engagement. Stand rated enough .. wasn't sure about the stress on the transmission mounts and that level of leverage.
  7. leeherron

    Engine Stand

    Okay .. maybe a dumb question, but someone asked me and I had no idea. How safe is it to mount the 258 fully equipped onto an engine stand without possibly damaging the transmission bolt placements on the block? That said, because we weren't sure, we placed a small support forward .. see pic.
  8. leeherron

    Fender Tear

    It wasn't the gap that I was worried about, but the warping that seemed to happen at that point from what appears to be less than adequate support .. This is what we ended up doing .. 16ga galvanized steel.
  9. leeherron

    Fender Tear

    Any modifications to reduce that effect?
  10. leeherron

    Fender Tear

    '81 CJ-8 Frame So looking at my fenders I see a consistent issue .. It appears to be the results of a design flaw in the way the metal folds. Anyone familiar with this problem? Straighten the metal, but leave the gap?
  11. leeherron

    Identify Transfercase

    That's what I was thinking .. just wanted to confirm. Thanks.
  12. leeherron

    Identify Transfercase

    Anyone able to identify this transfercase? It is attached to what I think is a BW SR4/T4
  13. leeherron

    Frame-Off : Harness

    Frame-off on my '81 CJ-8 So I'm thinking of building my own wiring harness. I've looked at the Painless, and a few others and question as to if I shouldn't just build my own. Now I own a store that specializes in 12v electrical .. (audio shop) and already keep 30+ color / sizes of cables on...
  14. leeherron

    Information Decals

    Yeah, red as you say .. .. what was the decal to its left?
  15. leeherron

    Information Decals

    It appears that this guy has a pretty good selection .. for those looking into the same question. http://stores.ebay.com/Vintage-Auto-Literature-and-Manuals
  16. leeherron

    Information Decals

    So I'm about to start body work on panels and parts. The radiator / Grill for example has information decals on the top .. can these be found or replaced? What is the current preference .. paint around them!? :( Suggestions?
  17. leeherron

    Tub Removal

    Thanks .. the shop is our new playhouse. Not at all .. actually only had three bolts break off in the process, and they ALL were attached to the windshield hinges.
  18. leeherron

    Tub Removal

    Okay, so my experience .. really not as bad as I thought it might be; no broken or seized bolts. A few hoses we just cut instead of properly disconnecting, but they are slated for replacement anyway. Here is my final version of the list, with notes: I didn't include taking the windshield off...
  19. leeherron

    Tub Removal

    Guess what I did today .. Need to add Evap lines from gas tank to the list .. there are probably some other details that I will add tomorrow. You wouldn't believe what two guys will do to finish a goal with limited tools. Thanks for the help guys.
  20. leeherron

    Steering Column Removal

    Alright, I am certainly putting this forum through its paces .. .. Any good posts on the removal of the steering column? Seems easy enough looking at the "manuals," but we all know how that often goes. I will be attempting to remove the tub tomorrow, and removing the steering column is part...
Back
Top