Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
As I collect parts and pieces for my Garage Pet, inevitably I wind up buying a duplicate; usually because I can't pass it up pricewise and/or it's condition is in better than what I already have. My question is I have three windshields. They are all different. The original has no rib and is...
Wonder if you can go to a bearing place (Motion Industries for us) and see if you can get a different spec bearing. Something larger with the same ID as existing....I would go round and round on this one but ultimately you suspect root cause to be bearing failure due to lack of grease. Both of...
I used a bronze bushing on the CJ5 4.0 swap. Seem to remember that the 4.0 to T18 via 176 housing didn't allow for a pilot bearing so a bushing it was. The 4.0 was a 94. No complaints.
I will be talking with him tomorrow. Dont think the price will move much so I will probably walk away saving some money. 8274's are rare around here for what ever the reason is. People keep em.
Looking at a 1973 Warn winch. Manufactured by Bellview. I know very little about this model. Told it is the predecessor to 8274 without todays options. What is the general opinion.
I purchased a marshalltown: ember paint striping wheel 1/4" from Jackson's art supplies. As much as I wanted to, couldn't justify purchasing a Beugler knowing this would most likely be a one time deal. For me. Best control was using my finger along edge of rim.
Dont know the history of the...
Summer's here which means vacation time and overtime. I choose to work blocks of nights instead of quick turn arounds to work day when filling shifts. So little CJ projects or mountain biking in the woods are what happens when I am waiting to go to work.
Scrambled rims were pretty bad so I had a...
Have to keep the AX15 granny low in mind. Have one as well as a T19. Rather go the AX route with the 4.0, no fussin around other than the 300 adapter.
Hard to get that beer up here. Black and Tan.....that's good stuff.
Going the 4.0 HO with the AX15 dana 300. Just haven't taken the time to research or ask about the conversion plate to mate the 300. I am old school and really like the T18 with granny low with a dana 20 with an early ford bronco gear set installed. So this will be new when the time comes...
I may still go with tanks inc unit. Was told that their kit was only for a 10.5" (think) depth and you would have to build extensions to allow for the additional depth...which they have. I have an CJ OEM 20G tank and I plan on cutting a hole and dropping a unit in that way. Simular to tanks inc...
Won't need to slide the carrier or inner pinion bearing off once pressed on. Everything occurs between bearing and housing. Pinion inner bearing outside cone you will need an extra ground down... If you are going with shims vs crush sleeve will need an outer pinion bearing massaged as well. The...
Ratech manufacturing will have the shims to fit between bearing and housing. Looking at my write up on my 20 rebuild, I realized that I didn't mention here that the pinion inner bearing outside race will need to be ground down to allow removal and access to the pinion depth shims. Others may...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.