OEM decal details

[Loyalpoke]

I have the tub off, sandblasted and primed. I'll post pics over on the restoration page. I need to get out in front on decals as it could adjust paint shades and powder coat colors. I am basically starting from scratch to replicate OEM decals. Pheonix graphics is a great deal but they don't have my desired colors. I have a graphics kid working on it for me. If you need a CJ8 vehicle template, I found this: https://getoutlines.com/vector-drawings/811/1983-1983-jeep-cj-drawings

1. Does anyone have a pattern? I am looking for the three color graphics like in the attached pic.
2. The other thing that could work is a good high resolution pic that is shot straight on and square with minimal reflections. If you are so kind as to do that, my email is loyalpoke@yahoo.com. I am only looking for the three color stripe decal like below.
3. Can someone measure the exact height of an OEM SCRAMBLER letters on the hood and the distance from the bottom of the letter decal to the bottom of the hood (the fender)? Any info like font style would be greatly appreciated. As I look around there are multiple variations of placement of the hood letters. Some look to be an inch or so off the fender and some look more like 3+. I would not be surprised if AMC had multiple variations, or so many have done custom graphics when they repainted.

 

[barrys]

I think the distance to the bottom of the letters varied greatly. I remember a discussion about that some time ago comparing known original paint Jeeps.

 

[DeLuke]

Those are the standard 1983-84 SR Scrambler graphics (and red colors) in the pic. Have you reached out to PG to see if they will print custom colors? I've e-mailed them before, and they might work with you.

 

[Loyalpoke]

Those are the standard 1983-84 SR Scrambler graphics (and red colors) in the pic. Have you reached out to PG to see if they will print custom colors? I've e-mailed them before, and they might work with you.

DeLuke, I asked for Pantone colors on one set they had. They were good to send out samples to me but coulet give me color codes. I had the impression there is a limited set of colors they will use. I want to be sure. I have a local sign shop that does a lot of vehicle graphics. If i can get the pattern it will save me $.

 

[Loyalpoke]

I think the distance to the bottom of the letters varied greatly. I remember a discussion about that some time ago comparing known original paint Jeeps.

Barrys, I thought so. It was obvious from pics it was all over the place.

 

[Loyalpoke]

Does anyone know if the size of the letter was consistent?

 

[kgt0001]

May want to try Austin Jeeps- Golden Eagle graphics....

 

[FLCJ8]

Can someone measure the exact height of an OEM SCRAMBLER letters on the hood and the distance from the bottom of the letter decal to the bottom of the hood (the fender)? Any info like font style would be greatly appreciated. As I look around there are multiple variations of placement of the hood letters. Some look to be an inch or so off the fender and some look more like 3+. I would not be surprised if AMC had multiple variations, or so many have done custom graphics when they repainted

Your answers will be in this thread:
https://www.cj-8.com/threads/scrambler-hood-decal-set-group-buy.40040/

It's full of useful information.