Recent content by CactusBif

So the instructions say if you have a computer operated carb you need to put the temp sensor in the exhaust manifold. If not then in the block. I put it in the exhaust manifold. I have a question though Riskit. Have you ever had to use the OBD1 scan tool on your Jeep? I bought one but it doesn't...

I have the exact same set up. I’m getting ready to swap in 4.56 tomorrow. If I remember I’ll let you know. I will probably move to a 5 spend next year.

Great. Thanks for the information.

I have posted on here before but I think I am botching it.

I have a 81 with the inline 6. My question is did the California Scrambler have the computer operated carb. My mechanic put the coolant temp sensor in the block, but I see online that it is supposed to go in the exhaust manifold. It is running rich, it stumbles when idling, and it is surging...

Nice. I’ll just loop it for the summer. Drop the box and have them solder it up

Where did you get the heater core? I need to do the same thing. I'm in NorCal and it does get cold as hell here.

I want to swap the front dana 30 carrier so I can put in 4.10 ring and pinion. The question is, can you put any old dana 30 carrier that will fit the 4.10 ring, or is there a specific type of carrier for my 81? My AMC 20 is marked CC. The chart says that it has 3.3 gears with track lok. I was...

I’ll check today. Thanks

So I have the 2.5” lift on. Did the springs, shackles, shocks, sway bars, and transmission drop. All is well except when taking off I hear a sound like metal on metal in first. It also happens in first or second if I let off the gas and then stomp on it to make the Jeep jerk forward. Any thoughts?