Search results

I used rattle can Rustoleum Self Etching Primer on the bare metal. I let the primer dry 30 minutes, then sprayed three light coats of Rustoleum Gloss Black, about 10 minutes between each coat, worked well. And with that, Operation Black Feet complete. Moving on, time to reinstall and...

Bunch of little projects knocked out today. My buddy came by and helped me remove the rollbar from the bed. I decided to drill all my missing bed holes: roll bar drain holes and all the 1" floor drain holes. Meaure, mark, drill a bunch of holes. I used my green Scrambler for reference. I...

A little penetrating oil and a few Tub O Towels cleaned most of it up. Most of the stuff on the floor boards was just old dirt and rust stains, no damage. Driver front corner. Passenger front corner. The two rear corners. Some bare metal and black stains, maybe primer showing...

At first I was shocked when I pulled the roll bar out, everything looks terrible!! Driver front corner, OEM panel, note the I am assuming factory drain hole drilled in the center. Passenger front corner. Driver rear corner. Passenger rear corner. The bottom of the rear rollbar feet...

Second and final coat of paint went on great, no issues. The second coat took way less paint then the first. I used the small hobby brush to dab some paint into the little white spot areas I had, worked wonderfully. I decided to pull the bulkhead back out and remove the strip caulk. I...