Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
I think I can see the problem... the hanger isn't actually flat... it has a little curve over it that allows for the metal from the crossmember to go under it, and the curve allow it to lay flat once it is tightened.
I just had the bolts from the inside to mock up... yes they broke off... both...
Could someone confirm for me that the “eye” of the rear hangers points towards the front and the bolts go rear-most.
Also, the hanger doesn’t seem to sit flush on the frame because the crossmember from the gas tank sits higher.... is there a shim or a nut that goes there to sit flush?
Does anyone have some pictures of the technical engine bay/tub sticker locations for an 84?
I think there is a vin sticker on the left rocker, seatbelt stickers, the shift pattern sticker on the dash, the emissions decal and fan decal.
Collins tech decals
Any others that come on original 84 cj?
I know this is a long shot... but I found the owner of this scrambler...
JeepHead Scrambler registry... On a MacBook computer hit Command F and search for Claus Langrock, Berlin.
Does anyone know Claus Langrock form Berlin?
I considered that, but only after I hung up the phone... I did find a thread on this after looking more carefully.... I reading through it now 700r to dana 300 adapters
Thank you for reminding me.... I do vaguely remember the mention of this, but I could't remember if I read it somewhere or I had someone tell me in person.
I called Novak and spoke to Craig, who said there shouldn't be a problem, especially with the 8. Does anyone have any insight into this...
Thanks Jim... unfortunately after blasting it I discovered a couple of other places there the body needs attention, so I may not be ready to paint as quickly as I thought.
In other news I did find a tilt, automatic cj column shift steering column that Eric picked up for me in Jersey. The...
I had forgotten how hard POR15 is to get off the skin... so my wife is a little upset with me. But the good news is the frame is all painted. Prior to painting I repaired the one frame mount that was rusted.
Of course all four of the sway bar welded nuts broke off inside the frame as well as...
I had the tube media blasted by a business that does it on a mobile truck. I sent the guy pics and he quoted me a price of $500. Everywhere else told me $1000. Of course The guy comes out and then the price changed to $1000. No worries, I figured it would be more than $500, but I do value...
sorry for the delay... I will again state that that the employees were not very helpful with this. Basically this paint is matched to the Phoenix Graphics door Appliqué, color nutmeg. The clerk told me that this code could be taken to any PPG (Pittsburgh Paints store) and they can make this...
Couple of the rivets on the strip for my metal top are out... I bought the McMaster brackets but I thought the brackets attached to the metal strip. I was thinking of cutting out the rivets, cleaning the rust off the metal and replacing it with rivets.
This is the first time I have used a...
Couple of the rivets on the strip for my metal top are out... I bought the McMaster brackets but I thought the brackets attached to the metal strip. I was thinking of cutting out the rivets, cleaning the rust off the metal and replacing it with rivets.
This is the first time I have used a...
I dropped the appliqué off at the paint shop... they will match and provide me a code for PPG paints that anyone can take to a local store and have made. I should have the code by Monday.
As a side note, the SEM caramel is a pretty close match to the appliqué.... however, the paint store clerk...
I ordered a door appliqué from Phoenix Graphics a couple of weeks ago to try to decide on a pain color. Maybe someone can confirm this for me, but the nutmeg of the original interior is actually darker than the nutmeg of the top. Below you can see the shade differences between the appliqué and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.