Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Needed to replace the electric fan and be cool radiator. Radiators are a touchy subject with me. Was going to go back to the be cool radiator but 2 to 3 months is a long time to wait for a radiator. Trying a engineered cooling products radiator. Design is more like the original radiators...
If you disconnect at the mount and try moving toward pass side. May only need 1/4" to 3/8" to bring in line. Also your skid plate bolt holes are probably slotted. You may have enough in the slots to move the rear of trans/transfer case toward pass side. It may take some of the twist out of...
Check to see if the trans mount is in the correct holes. If you unbolt the trans mount and slide the trans toward the pass frame rail (it wouldn't take much) it would center the motor in the frame rails. Kinda looks like the engine/trans is slanted toward the driver side.
Can you put the hard top on. Then pull the windshield frame into place so the windshield edge fits into the hard top. If that's in place you can try to adjust the doors. Do you have a new windshield gasket. Many are too stiff (thick) and don't allow the windshield frame to pull back into...
Measure the length of your original and the replacement. Some of them can have a difference ot around 2 inches. I'm guessing you have the bolts put in behind the dash so you have it bolted in. If short, may be time for a new aftermarket steering shaft. Make your shaft is extended. They come...
Usually heat for rusted /oxidated bolts. I don't know if you are painting the rockers or leaving bare aluminum. This penetrating is awesome at breaking it down rust even with out heat. Put on and let soak in, reapply and keep working it to hopefully free up.
Kano Aerokroil Penetrating...
I like the colors, torn between removing the ball and putting a chrome one on or leaving alone. Make sure if you take it off you take a razor knife and cut it clean around the ball. Don't want to remove the ball and chip/pull the powder coating.
Disconnect the fuel line at the throttle body, run the pump to clean out the fuel line. Don't know if the sniper has a screen filter in the throttle body (don't believe so). If it does clean the screen. My mechanic got me on a fuel injector cleaner (blaster fuel injector cleaner) Put a...
Sanding and painting around the primer is very hard to do, even for experienced painters. Their is steps to try to blend it in without having a line between the old and the new paint. Also painting over the primer will take more coats than the blue paint which will make the blend even harder...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.