Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
The single u-joint shaft up front is working on the atlas as far as u joints and such go. I did build my own with a kit so it is long travel so I wouldn't have the issue about pulling it apart again. So the issue isn't with the front shaft other than I did not get it as straight as I thought i...
Thanks @bigwalton so I tried to go with a straight 2 ujoint driveshaft for ease of replacement on the trail and strength. Built a front and rear with good heavy thick tube. Talked to a bunch of folks who are building extreme style rigs and set up the angles as they suggest. Well i have come to...
Well found the shake. I have narrowed it down to the driveshaft I built and the new yoke on the atlas. Old set up is on right now so I can make it to the event here in a few weeks If I find some time I will work on it some more in a few days.
Well scrambler officially moves under its own power again However... I Am having an issue I am going to try and work through today. Think it is a brake caliper issue which would be a best case scenario. Going to remove the calipers and go for a test ride to narrow down the issue. Lots of...
Thanks Dain. I just used YouTube and the book store. Bought a welder and started doing it. No way I could have done this without it. And i truly enjoy the time I spend in my helmet so that helps.
Truss welded on, brake brackets swapped over hubs swapped over ARB swapped into new housing. Also got new yoke on the pinion section. New seals in the hubs and pinion. Pretty good progress today I think. Thinking one more day as long as gear setup goes ok and it should be back under the jeep.
New 14 bolt tubes welded and it is sleeping in a blanket to cool down. Need to drill and tap for the ARB then the truss can go on.
Pulled the old axle today also and took some measurements of how the gears are in this one so I can try to get them the same in the new housing. Backlash is 6...
Put the shocks on the front axle today. Put a new motor on my winch. Pretty sure I might have wired the last one up wrong. Took a few tries but I’m pretty confident I got it right this time. Then moved on tho the 14 bolt replacement. New housing stripped of brackets and truss mocked up. Also cut...
Front axle repairs are pretty much done. I did build an anti warp bar for the front and have done a great deal of figuring to be sure it would actually work. It will transfer some pretty strong forces that were figured in when building. However after doing all the work to build the bar I tore...
Well still waiting for parts so I can get the rear axle fixed. I wanted to do as much of the welding as I could before I put the internals in parts are supposed to be here on wed. I had some time to work on the front this morning. As you can see from the posts above I had some issues keeping the...
I have yet to need either. I have been reading a GMRS forum along with being on a few Facebook groups on the subject mainly to increace my knoledge base if something should occur. From what I can gather the only time there would be an issue is if you were interfering with somone's repeater. I...
Not sure how Jessie's worked but there were deffinatly a lot of them around at SMORR. I ran both GMRS and CB for about 2 hours then shut off the CB. Was able to reach from all the way down in the back of the park to up by the pavilion with Jeeperdd's Dad while we were trying to get my rig back...
Repairs are already in progress. @Jeeperdd and his Dad Dale were nice enough to be sure there was machinery around when I came to pickup the Jeep a few days ago. We were able to squat the front all the way down hard on the bump stops and then let everything go to full drop to measure for a new...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.