Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Ok so I never made it to a scramble event before but this one is pretty close, whats required to attend? cj8.com membership paid infull? and something else?
I have taken it down because I put an above ground saltwater pool and I did not want saltwater all over my top all summer long. I plan to rebuild it on the backside of my barn at some point but It was just 2x4 cross pieces with Lshaped 2x4s for the runners with stops on the back so it stops...
I built me a rack under my porch Attached pt 2x4s to the 6x6 posts and fixed it so I could back right up to the rack and slide it right off onto the rack. I made the rack Lshaped so when the top gets onto the rack it cant slide off the sides of it. Its just the right height so I can get it off...
It will work but your going to need to tear it down to swap outputshaft and source you a tcase adapter to go inplace of the 2wd tailshaft. UNLESS you have enough room and run a divorced tcase but your looking at putting it in a scrambler right?
If I couldnt get an entire nuts worth of thread I would not have run those adapters. Or at leat 3/4 the width of the stud. Looks like its a 1/4 of the depth. Did they even have locktite on them?
The shifter tower sticks up through the insection plate for maximum clearance. With a body lift you may be able to get it high enough in the rails to tummy tuck it
In factory form the 5th gear would back off its main shaft because over time the retaing nut would unthread itself. The fix is to pin or lock the nut to the shaft so it wont back off. when rebuilding its not an issue to preform this fix. I think you can even do it on the truck if you can acess...
I have a nv4500 behind a cummins in my scram and if you get the 5th gear fix in a new or rebuilt trans that should be the last trans you ever buy for it. Its got to weigh 250 -350 lbs with the flywheel. Without a body lift I have it and the dana 300 tucked higher than a stock cj.
should a 8274 freespool out when you pull the big round knob?? I can pull the knob but its all I can do to pull some slack out. Or are they power out only?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.