• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. nib

    Well finally start building

    Rotated rear mount. Rear disc conversion (everything you hear is true).
  2. nib

    Well finally start building

    Also your rear mounts appear to be in the stock position so I can see the reason for the dogleg shackles. In my case the rear mount can be welded to compensate for extra length YJ springs. Great info thanks.
  3. nib

    Well finally start building

    I see dogleg thanks. The springs look almost flat as she sits. Is that fairly normal or.... spring over?
  4. nib

    Well finally start building

    Thanks (y)
  5. nib

    Well finally start building

    Yes there is a very good chance they're on backwards. I had a fifty percent chance of getting it right (one more reason I don't play around with Vegas). Currently they are just placed on frame will rotate them as you folks recommended. Then probably tack weld, turn frame over and install drive...
  6. nib

    Well finally start building

    So angle / slope to the rear?
  7. nib

    Well finally start building

    Well after speaking with WFO they suggested assembling the front springs (which I did) I then pulled a length from eye to eye and came in at 43.125" which is dame close to the measurement that was stated by FLCJ8. Now from WFO suggestions front shackles at 90 deg. Tack weld front rear hanger...
  8. nib

    Well finally start building

    Hey folks. After input from members and my own pee brain I decided to remove the reverse shackle and go back to a more original configuration. So basically what I'm building is a Rocky Road YJ kit with OMU HD springs. Now the PO had removed the factory rear front spring mounts. One of the...
  9. nib

    Well finally start building

    I agree with your observation. To add to that when measuring from front of frame to sleeve they are not equal 1/2" different. That's why going back to original (shackles in front) might be the way to go. I could just by pass these and weld on new hangers. The old hangers that were removed I...
  10. nib

    Well finally start building

    The front hangers I have (bought YJ conversion from Rocky Road with OMU springs)
  11. nib

    Well finally start building

    My main concern is the sleeve that is welded in for the reverse shackle is 1" ID. To install a poly bushing then a sleeve it won't leave much of a bolt. It appears the original set up didn't use a inner sleeve so it was 1/2 bolt through poly bushing also the poly bushing would have to have large...
  12. nib

    Well finally start building

    Cool thanks. I think I'll run that winch plate. It has ears that go down the side of the frame that will replace the shims that were installed for thr reverse shackle. The spring hanger is just what I need if I decide to run the non reverse shackle set up. Since the original hanger has already...
  13. nib

    Well finally start building

    Thank you
  14. nib

    Well finally start building

    This is what II was looking at. WARN 13910 Fixed Winch Mount Kit, Fits: Jeep CJ and Scrambler (1959-1986)
  15. nib

    Well finally start building

    I think I'm going to run the shackle reversal. Going to contact Mountain Off-road for info about rear shackles. The way the front mounts fit the frame they allow for a winch plate. Any favorites?
  16. nib

    Well finally start building

    Sorry this post is so spread out. The rear springs with the Rocky road mount appear to be fine the front is my question. If I run the Rocky road set up (stock configuration) I will need to rebuild a spring mount or does anyone know of an aftermarket mount that could be welded or bolted in the...
Back
Top