Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Transmission shifter fitment. I checked to make sure the Dana300 dual shifter will work. A plug on the tranny was interfering with the shift linkage so I cut it a bit shorter and all is good now.
Dana 300 input shaft installation. New bearing, shaft and seal. So interesting note. The directions have you install the seal backwards. I found this to be strange but the new bearing is a 2RS meaning it is double sealed already and this national seal is double lipped.
My family took a trip this weekend and I stayed home so I had the entire time to work on the Jeep. I got a lot done and am in a great place with the project now thank to that time. Here is the list of things I got done and I have some picture but the one I will go over the most in this post will...
Wow perfect thanks!!! This saves me allot of headaches shopping around. I have heard two sides to the steam port argument. I heard some ditch them and other swear they must stay to prevent air pockets. Right now I am unsure but I an fab something up if I need to add it in.
The good thing is I am running electric fans so I can more easily clear the hoses from moving parts. The part number would be awesome if you have time to find it. I think my 3 core will do fine since it kept my high compression 327 v8 cool when I had it. I am just getting tapped out budget...
I started this thread to talk about cooling choices for LS swaps. What are you currently running on your swap and do you like the setup?
I am at the point of making a decision on cooling the Jeep. I have several three row copper radiators sitting in my basement that I am thinking of using...
I have been in limbo the past two weeks waiting for parts and it has been crazy cold so that hurts my motivation to be in the garage. I have a free weekend coming up with no kids or wife so I plan to get some heavy work done. I plan to do the fuel delivery system, paint the motor, clean up the...
If you do this i will be more inclined to provide a heavier amount of detail in my threads for others to read later on. I used to be that way but have backed off on forums alot over the years. I like the idea if it helps others.
I haven't updated this in a couple weeks but I have been focusing on buying parts. I spent a few hours stripping my stock harness down and even though it was going well I bit the bullet and bought a PSI conversion harness last night. The main reason is I want to hide all my wires and have the...
I had the slots on my CJ5 and loved them. I found a set in Tolland CT for $150 with a spare. I wish I held onto them for the CJ8 but I sold them with the 5. The factory 5 slot rims are forged and super strong.
AJ is correct that it is located behind the glove box. It controlled some distributer timing and the stepper on the carb along with the emissions. You will know if this does not function because you will have a hard time controlling the carb at idle and your engine will lack power due to the...
I was looking at the LS swap headers from them but the close up pictures look like they are cheaply made to me. I am curious. They keep popping up on my FB feed.
Yes the flywheel and clutch should give you the rotational mass needed along with programming out the motor braking during driving conditions. I didn't think of that before.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.