Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Well I want this to be a LCG build. But I'm also realistic with somethings too. So I want to try and start with a SUA for the 14 bolt and see how high I sit. Like I said in an earlier post I'm sure I'll remove at least one leaf from the spring pack and maybe two we'll see.
Depending on how...
So as the build is call I'm going slow but steady. I'm still working on getting junk out of the tub. I've muttered this to myself before but I have to say it again. What the freak is with the torx screws! Man I hate them. I'm trying to get the roll bar out and all my knuckles are paying for...
Hey I agree with you. Heck if everything goes as I hope by the end of this build I'll have something from several different manufacturers too (SM420, 14 bolt (GM), 258 block (AMC), 4.0 head and MPI (Chrysler) York compressor (Volvo), Military Humvee taillights (AM General), Shock towers (Ford)).
Yeah I definitely think it was both. There are some areas in the bed where it is just coming off its so thin.
I thought this was interesting too when I took out the heater box the original computer was still sitting on top of it. I had a quick double take when I saw the blue oval on the sides...
Ok since my last post I tried one more spot and this time I put it on a little bit thicker and let it set just over an hour.
It basically only left a little bit of original paint around the two holes in the picture that are where the bolt holes for the seat are. All the rest is basically...
So like most CJ owners I have a few things that I never cared for that the previous owners had done. The SRS, the under axles skid plates and the bedliner to name a few on mine. I like spray on bedliners in Jeeps its just that this one wasn't done very well. So as I'm kind of tearing this...
So as I'm installing new heater hoses and such to run the new radiator and wiring harness for the fan I start to pull off the old hose from the firewall to the heater core. And of course this happens:
The inlet pops off and pretty much falls out of the firewall. :banghead::banghead:
So of...
So over the last few years I've wheeled it pretty well. Here's a pic of the inside of my hood which I use as a trail log for our trips. This is most of them but a few trails were done after this pic, but you get the idea.
Hell Hole Jeep Trail
Chalk Bluff Snow Run
Never really had any...
Well I'm as ready as I'll ever be. I'm ready to start this build. I hope that people don't get bored with my rambling sometimes but I would like to be detailed in this project. I also like pictures. So I'm going to supply plenty. What we have here is my 1984 Scrambler Laredo that I bought...
As I was deciding between the 465 and the 420 I decided to buy the 420. In part because of the info from this thread. Found it in a '65 GMC truck for $120 so not a bad deal. Since I have the T-5 still it looks like it shouldn't be too difficult to get it mated up with the bellhousing. Now...
I know the original post indicated that he was choosing between the three suspension options. But was just wondering if doing a flat fender and opening up the rear a bit may be an option.
I am really digging the low center of gravity designs some people have been using recently to run bigger...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.