• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. MomoJeep

    Misc mystery part, what is it!?

    Ah, so somebody had the spare tire swing gate removed, and in place of it a big Antenna?
  2. MomoJeep

    Misc mystery part, what is it!?

    If you both think so, that's probably it! It may have been bolted through the roll bar or something..
  3. MomoJeep

    Misc mystery part, what is it!?

    Like 1.5" angle x about 1.5" long... 3-4" long bolts
  4. MomoJeep

    Misc mystery part, what is it!?

    Anyone know what this is??
  5. MomoJeep

    3.92's axle gears in AMC20/D30 combo?

    Oh.. and.. I think 2200 RPM is an ideal cruising RPM..
  6. MomoJeep

    3.92's axle gears in AMC20/D30 combo?

    Thanks everyone! Yeah, I don't need 3.92's. .. The choice is between 3.73 and 4.10. I think that's about a 200RPM difference at cruising speed... I know lots will say "just go 4.1". But here's why I'm undecided: Note: I run 33" or 32" times, probably 33's from now on... - I *don't* need the...
  7. MomoJeep

    3.92's axle gears in AMC20/D30 combo?

    I know this is splitting hairs, but if I could pick a ratio for my set up, it would be 3.92. Yes, 3.73 or 4.1 are very close. But 3.92 would be ideal. I think 3.92 is available for D30's but not for AMC20, does that sound right? For example, D30...
  8. MomoJeep

    Stupid Question - Overdrive

    Totally.. Engine noise is one of my considerations as well. With my current 3.31 gears and a low-end torque 4.2, I can shift into 5th at 70mph and be around 1800 rpms and the main benefit is the **relief from the engine noise**!
  9. MomoJeep

    Stupid Question - Overdrive

    Yes, I have determined my 4.2 (MPI and 4.0head) likes to be around 2200 at cruising speeds. It's got torque down to around 1800 at speed, and I like to shift up around 2700rpm.
  10. MomoJeep

    Sloppy Steering! do i need a new steering box?

    Thanks for the replies. Here's why I still don't get it.. First some assumptions: - we are talking about the lower column bearing (just outside of the firewall in the engine compartment, near the master cylinder). Correct? - just below that bearing, there is a U-joint in the steering shaft...
  11. MomoJeep

    Rear sway bar on 4.5 RE springs

    Is it quick-disconnectable?
  12. MomoJeep

    Sloppy Steering! do i need a new steering box?

    When we are talking about play in the shaft/column, it would be a rotational play. Or in other words, angular slop as the shaft rotates (something that could be measureed in degrees). So I don't understand how side-to-side or lateral play (which would be measure in fractions of an inch) would...
  13. MomoJeep

    Stupid Question - Overdrive

    (1) For a long time, I've been thinking of the 5th gear in a 5-speed manual as the "top gear". In other words, the gear to use at your highest speeds. Also, on the Novak website, they talk about "gear span". On other words, it's not how low your lowest gear is, but how big is the span from...
  14. MomoJeep

    Stock tire sizes

    I keep seeing that a '83 Scrambler could have come from the factory with 27", 28" and possible 29" tires. Does anyone know if this is true? What is the most likely stock tire size on a 3.31 ratio axle? Also, if there were different sizes, would 27's and 29's have been on different axle ratios?
  15. MomoJeep

    Rear sway bar on 4.5 RE springs

    This is interesting.. because.. (a) I have wanted a real swaybar because a hardtop, gear in the back, and a roof rack gives me a fair amount of rear sway and I want to go to softer springs. And I would want it to disconnect for off-road.. and (b) I have seen aftermarket swaybars for CJ's before...
  16. MomoJeep

    Seat bracket - drivers side tilt

    Great! Thanks! Now what about a passenger side slider!? Why is it missing in the first place!?
  17. MomoJeep

    Seat bracket - drivers side tilt

    Yeah it faces the drivers door. I guess I just have to accept that the floor holes on the right side don't line up, and weld on those tabs!
  18. MomoJeep

    Seat bracket - drivers side tilt

    Randy, this is EXACTLY what I have for the driver's side, but minus the welded on tabs. And, that is EXACTLY what I was planning to do (weld on some tabs). Both of my flanges on the driver side bracket face the outward toward the drivers door. Yet the holes in the bed are on the other side as if...
  19. MomoJeep

    Seat bracket - drivers side tilt

    Randy, I thought I figured it out, but I was wrong. The "handle" to flip the seat forward is on the left side, so it must be a drivers side seat. on the bottom of this flip bracket, the holes on the left side line up. The holes on the right do not, they are over to the left about two inches.
Back
Top