• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Seat bracket - drivers side tilt

MomoJeep

Basic User
City
Seattle
State
WA
So my '83 Scrambler came with a passenger seat that tilts forward, but a fixed drivers seat. I grabbed a driver's side tilt bracket off a CJ-7, and turns out it's NOT a direct fit (the left side does not line up with the holes in the floor). I thought when I got it that it was from a late model CJ-7.

Does anyone have any insight on this? Did '83 Scramblers have optional drivers-side tilt seats? Is a CJ-7 bracket always going to be different?
 
Woops, I meant the *right* side of the bracket does not line up with the holes in the floor..
 
maybe the bracket I got was from an earlier era of CJ-7's, like pre-1980's.. ?
 
I bought some Corbeau CJ-7 seat brackets for my 1984 CJ-8 - thinking they were all the same. I seem to have had the opposite problem as you... the driver's side bracket bolted in and the passenger bracket required all kinds of mods to work. I was very surprised.
 
This surprises me. I thought the mounting locations were the same. The only thing that I know of is the height difference for the passenger side between the CJ and YJ. The YJ is shorter to accommodate a slider.
 
I've installed seat brackets from YJs and CJ7s in CJ8s with no problems. TJs needed an adapter block on the outer driver side to fit.
 
Not idea if this is valid. True it with the mount in the other position. If you tried it closed, open like seat is folded forward. Maybe it is torqued and twisted . Maybe other position will bring in back into a bolt in position. I never had a problem so just throwing this out there. My first CJ8 had a fixed driver's seat, had no issues putting a folding one in it's place.
 
How about a picture to see if it is OEM or not? I have done this many many times and never had an issue.
Only time it was a problem was when the seat was in the "open" position.
The seat needs to be in the forward "closed" position with it locked in place so the base will line up.

Also, is this an OEM tub? If aftermarket, those holes usually aren't exactly right and maybe the original bracket was modified to fit the tub.

cb
 
I'll try to take some pictures. I do have a stock OEM tub. I wonder if different transmission options meant different tub shapes?

Rather than modify the thing, I'm more in the mood these days to just find one that fits. Does anyone have one to get rid of?
 
All the tub holes on a stock tub should be the same. I installed a folding bracket on the drivers side of my 81- the bracket came out of an 85 ‘7.

Are they incorrect in front to rear spacing, or are the off in distance from the other side. I’m at the coast right now, but when I get home later this week I could take some pictures/measurements of my setup.
 
I just discovered that what the wreck yard sold me was actually a PASSENGER side tilt bracket (the lower mounting "angle" material right side points under the seat instead or outboard - this exactly matches the tilt I already have on the passenger side).

Does anyone have a driverside tilt seat bracket?

Also, my drivers seat has a slider under it (forward/backward seat position adjust), but the passenger seat does NOT! Does anyone have on of these?
 
Glad you got that figured out. The passenger fold/tilt base is taller and adding a slider raises the pass seat higher than the drivers.

But - you can ad a slider if you want.
 
Glad you got that figured out. The passenger fold/tilt base is taller and adding a slider raises the pass seat higher than the drivers.

But - you can ad a slider if you want.
If you have a short passenger.

Let me see if I have a flip seat in the Scrambler I just picked up. Doubt it, but maybe
 
Glad you got that figured out. The passenger fold/tilt base is taller and adding a slider raises the pass seat higher than the drivers.

But - you can ad a slider if you want.
Randy, I thought I figured it out, but I was wrong. The "handle" to flip the seat forward is on the left side, so it must be a drivers side seat.

on the bottom of this flip bracket, the holes on the left side line up. The holes on the right do not, they are over to the left about two inches.
 
Randy, I thought I figured it out, but I was wrong. The "handle" to flip the seat forward is on the left side, so it must be a drivers side seat.

on the bottom of this flip bracket, the holes on the left side line up. The holes on the right do not, they are over to the left about two inches.

It has been said before, post a picture.
You might not even have a CJ bracket for all you know.
Until then, not much help can be given.
Also make sure what you have isn't damaged/bent... if it lines up, but is off by 2 inches, then that sounds like something is crooked potentially.
cb
 
Randy, I thought I figured it out, but I was wrong. The "handle" to flip the seat forward is on the left side, so it must be a drivers side seat.

on the bottom of this flip bracket, the holes on the left side line up. The holes on the right do not, they are over to the left about two inches.

Sorry. The driver side is a slider and the passenger side has the flip
DE4E7E49-AABF-4003-8CB0-FBCBB863F3F3.jpeg
 
I just discovered that what the wreck yard sold me was actually a PASSENGER side tilt bracket (the lower mounting "angle" material right side points under the seat instead or outboard - this exactly matches the tilt I already have on the passenger side).

Does anyone have a driverside tilt seat bracket?

Also, my drivers seat has a slider under it (forward/backward seat position adjust), but the passenger seat does NOT! Does anyone have on of these?
This might help. I fount it on eBay.
 

Attachments

  • 4E1AB974-FBF5-4FCF-B95E-9CB3B54A0DB5.png
    4E1AB974-FBF5-4FCF-B95E-9CB3B54A0DB5.png
    147.9 KB · Views: 8
Hopefully this helps. Fist I’ll post pics of the passenger side.

The release handle is on the right side of the seat, towards the door panel. Both the flanges that bolt to the floor angle inwards, towards the center of the tub.

Pic from the pass door-BFF7EF52-4121-4DD8-BA5D-484667711018.jpeg
Pic of the inner mounting flange-
CA361B89-0431-4AC4-9AAF-A5186695527A.jpeg


Now over to the drivers side. The release handle is on the left side, facing the door panel. The flanges that are moulded both face outward- the outside flange faces the drivers door, and the inside flange faces the drivers door. These appear to be the passenger flanges, just mounted opposite from the pass side.


3F128FF2-A429-46C5-A803-A170EBEFD7EC.jpeg

But if you look close, you will see that there are no bolts in the inside flange! That’s because the bolts go through two tabs that are welded to the bracket. These tabs face the center of the tub.

0BD5FBDD-F114-4F77-9A83-2D3502789929.jpeg

These brackets came out of a 1985 CJ7 and were factory original. I assume you could add these tabs if your bracket doesn’t have them.

It almost seems like the driver’s slider was an afterthought from the factory, or possibly by welding the tabs they could use the same lower brackets as the passenger side. The drivers folding bracket mechanism is a couple inches lower than the passenger side, to accommodate the height of the slider.

I sprayed mine with bedliner, and the drivers latch rods were a hair loose, so I used .50AE cases to shim them to size. 😁

I also welded cross braces from side to side to stiffen the whole mechanism. I think the reason we see so many cracked seat frames is because of the flex in the bases. Here’s a couple pics of the drivers side. I also mounted the sliders back a couple inches to get full rearward travel. 0637E233-4C6E-4BD6-B294-FD9A18B410D1.jpegAB0AFDB5-2A88-4C3E-A82E-1C825D37B5C5.jpeg
 
Last edited:
Hopefully this helps. Fist I’ll post pics of the passenger side.

The release handle is on the right side of the seat, towards the door panel. Both the flanges that bolt to the floor angle inwards, towards the center of the tub.

Pic from the pass door-View attachment 104675
Pic of the inner mounting flange-
View attachment 104676


Now over to the drivers side. The release handle is on the left side, facing the door panel. The flanges that are moulded both face outward- the outside flange faces the drivers door, and the inside flange faces the drivers door. These appear to be the passenger flanges, just mounted opposite from the pass side.


View attachment 104677

But if you look close, you will see that there are no bolts in the inside flange! That’s because the bolts go through two tabs that are welded to the bracket. These tabs face the center of the tub.

View attachment 104678

These brackets came out of a 1985 CJ7 and were factory original. I assume you could add these tabs if your bracket doesn’t have them.

It almost seems like the driver’s slider was an afterthought from the factory, or possibly by welding the tabs they could use the same lower brackets as the passenger side. The drivers folding bracket mechanism is a couple inches lower than the passenger side, to accommodate the height of the slider.

I sprayed mine with bedliner, and the drivers latch rods were a hair loose, so I used .50AE cases to shim them to size. 😁

I also welded cross braces from side to side to stiffen the whole mechanism. I think the reason we see so many cracked seat frames is because of the flex in the bases. Here’s a couple pics of the drivers side. I also mounted the sliders back a couple inches to get full rearward travel. View attachment 104679View attachment 104680
Randy, this is EXACTLY what I have for the driver's side, but minus the welded on tabs. And, that is EXACTLY what I was planning to do (weld on some tabs). Both of my flanges on the driver side bracket face the outward toward the drivers door. Yet the holes in the bed are on the other side as if the flange should face the passenger side. I could drill holes in the floor, but welding in proper nuts would be hard, and the hole location would also blast through some structural member underneath. I prefer to not chew through things. when possible!

Sorry I haven't posted pics of mine yet (it's been a busy summer!).

And I've always wondered why I got a slider on the driver seat and NOT on the passenger seat. Was that the factory set up?
 
Back
Top