Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Use a rear seat cover and cut the one edge/side... they are the same... similar for a low back... cut the side that needs to taper.
I posted the differences up here a while ago... they are the same seats rear/front lowback, just tapered on one side to make it smaller to fit.
cb
I saw 2 plates that had what it took for an antique/historic CJ plate... now I just need to find someone in KY that has an 83 and it will be perfect!
cb
Overall it is pretty similar to what you see under the CJ floors... the detail they put into it is very impressive.
It isn't exact and some of the stampings might be a little more round on the floor details, but the holes/floor impressions/etc. are all very close.
Much better than what had been...
I was able to get my hands on a Keyparts full floor section for a CJ5.
It has the 2 front mounts under that normally the older style full floors did not.
So far, impressed with the quality of what I am seeing.
Only thing so far I see is that the opening for the transmission tunnel cover seems to...
How much of the column do you need? I have a parts column on CL...
https://nh.craigslist.org/pts/d/jeep-cj-cj5-cj7-scrambler-cj8-oem/7707485893.html
Someone needed just the top plastic part as theres was worn, so I sold the whole column to them for $100 and then he asked if I wanted the...
What are you looking for? stock? unmolested? project?
Also budget? I don't see anything anymore for under $4K and then it just goes up from there.
I see a few around me, but they are in need of total restorations.
cb
When I get this to the place I think it should be, I would consider it... the end caps are from @Kim Dawson and the steel was purchased pre-cut... the places where it will screw together is what needs the most fabrication... and then the connections to the rear crossmember were an old front...
The workbench has all the cutting implements on it.. nothing exciting there... but here are all the resultant pieces... modular bumper is back on the list to get done... been too long.
Cut down an old bumper for the mounts... 4 of them.
Mock up
Side views
Not 100% sold on it yet...
Funniest part of the evening though... I was looking for the bump stops for the frame (shown in one of the pictures) to install and I ran into these:
Thse are the original type setups that I have used in the past. I had these from a previous rig and was planning on using them for this one...
Bench work... overall a lot of time/effort just to use a part that wasn't really designed to go on a CJ... let me explain.
I have a TDK frame setup and later Dana 30 axle and regular spring plates with a 2.5" BDS suspension.
So, regular sway bar links wouldn't work, so I had some other ones...
I am not sure if this was the thread or if there was another one (I looked but can't find what I am remembering)... the cross brace is really designed for a stock frame and box... I was using a TDK frame and a red head new gear and it wouldn't just bolt up. I had this problem before, so I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.