• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. RockTractor

    When's the last time you drove your project?

    Believe me, I thought about it. :-) I have all the parts for the heater - I just need the time. So, given the time, I'd rather make progress rather that do something that will have to be undone later.
  2. RockTractor

    When's the last time you drove your project?

    Never. I bought my project in 2008, moved it into the shop to start work on it in 2013, and have been (very slowly) working on it off and on since. I'm a lower heater box and a clutch bleed away from being able to get it in and out of the shop on it's own power... 8-)
  3. RockTractor

    Shocks for 5” lift

    Rancho has a great spec sheet for their shocks: https://www.gorancho.com/downloads/product-catalog/Specifications.pdf I'd try to find your "stuff" and "droop" measurements - then select a shock tailored to your Jeep. You'd be looking for shocks with "L1" upper and lower mounting codes...
  4. RockTractor

    Current Scrambler pics

    @Interceptor Why the decommissioning?
  5. RockTractor

    V8 scrambler

    Good, I'm not crazy then. o_O I always though it was the evolution of the stamp: JEEP > Jeep > Jeep (with "e"s centers filled in) > Joop > The blob it is today
  6. RockTractor

    V8 scrambler

    No doubt! My '84 is stamped "Jeep" on one side and "Joop" on the other. My bodywork guy and I could not find any evidence that the side panels were not factory.
  7. RockTractor

    Current Scrambler pics

    Glacial progress on my project continues… I got the Atlas shifters installed. It required a little bending of the shifters and less tub cutting than I expected. I still need to clean up the tub cuts to eliminate stress points (corners).
  8. RockTractor

    Been a while since we had a Beer thread...

    Damn. That cider sounds great and the food look awesome!
  9. RockTractor

    Current Scrambler pics

    I think you are correct. The slope of the windshield is what convinced me. It's very well done..
  10. RockTractor

    maximum driveshaft ujoint angle

    Your t-case and diff angles are probably OK for a standard two joint shaft. But, you are probably pushing the limit with your overall driveshaft angle. Here is a bunch of great tech on the subject: https://4xshaft.com/blogs/general-tech-info-articles/driveshaft-angles
  11. RockTractor

    Renegade, stationary, rear seat

    My guess would be for holding the seats belts in position...
  12. RockTractor

    Current Scrambler pics

    Beefy! Love the wheels and tires too!
  13. RockTractor

    Voodoo Blue 82 Complete Refresh

    Thanks! Did you use anything between the hinges and the body / frame?
  14. RockTractor

    Voodoo Blue 82 Complete Refresh

    I'm really loving the black accents on everything. I may have to head in that direction on mine. What brand of windshield hinges did you use? Are you happy with them?
  15. RockTractor

    Project Panel Replacement

    It's not how I would do it - but, it's not unheard of: https://shop.advanceautoparts.com/p/imperial-mounting-kit-system-226201/6014844-P
  16. RockTractor

    New to the group

    Welcome - that looks like a real clean CJ-8!
  17. RockTractor

    Winch mounting plate with frame side plates

    I had this same problem on my CJ7 due to the wider aftermarket frame. I simply replaced the side brackets with some angle iron that had a longer "reach" towards the center on the top and the used the warn mounting plate as is.
  18. RockTractor

    Current Scrambler pics

    Looks great - love that blue!
  19. RockTractor

    Repro fender flares

    I just installed a set of Rugged Ridge flares (Part # 11604.01) based on the feedback from this forum. I couldn't be happier with them. Be sure you are installing the rear flares on the correct side - it is very easy to get them mixed up.
Back
Top