• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. gaducker

    What did you do with your Scrambler today? September 2014 version

    If you decide to part it I will take the rocker trims....
  2. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    Got it home and driving it everyday. Put a new driveshaft in last week
  3. gaducker

    What did you do with your Scrambler today? September 2014 version

    Got full widths installed and sittin on 37s with H1s
  4. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I will send you one, I just used a 2 inch exhaust clamp around the snout of the gear box some heavy wall 1 inch square tube and welded the tube to the clamp and to the frame. I did it quick and simple just to see if it made a difference. Boy it made a heck of a difference I will go back and...
  5. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I also built me a steering box brace and I must say with the 37s on that was the single biggest improvement to steering and tracking down the road that's been done since I mounted the big tires.
  6. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I picked up another brand new m1101 trailer this weekend with brand new tires so now I have 4 brand new tires on the jeep with wiskers. It should ride great now. I also put a dual carden rear drive shaft on the other day and that was where 90% of the shake I was feeling was coming from. 28...
  7. gaducker

    Fall ride at Hot Springs AR- November 7-9, 2014

    9.5 hours for me
  8. gaducker

    8274 projects

    LOLOL That sounds like me, Mines been mounted and working for almost two years but I have yet to fill up the drum with wire or rope. I get some goofy looks when folks check out the jeep and they get to the winch. HUHHHH??
  9. gaducker

    Fall ride at Hot Springs AR- November 7-9, 2014

    You planin on coming?
  10. gaducker

    line lock e-brake on a CJ7

    I am putting a line lock or a disk brake at the tcase, either way its not a mech brake set up and unless you get a late modle rotor with an internal brake shoe set up you are going to be relying on hyd pressure to do your holding. eldarodo calipers are a pain to keep adjusted.
  11. gaducker

    82 4bt build

    what pitman arm?
  12. gaducker

    82 4bt build

    I mean dose it have enough throw to put the knuckles on there stops on both sides?
  13. gaducker

    82 4bt build

    This is next for me, everything worked out? Can you turn sharp both ways?
  14. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I broke down all 4 tires today to get them turned the right direction and to balance them, them sobs are HEAVY and they wore me out in the heat today. I know one thing, if you have a flat you better have some help to change it.
  15. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I have a set of h2s that I got when I got the axels, They stuck out to far. The only reason i like the h1s are the offset and they just look mean. I have a gatoraid bottle on my draft tube at this time. I am going to put a scavage pipe in the ehaust pipe about half way back and see what that...
  16. gaducker

    Got any funny pictures?

    I should have been at the scene of the accident to see how well the blazer came out..
  17. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I had one that looked like a bent rim on a bike so I took it apart and the run flat and ring were in the wrong spots, the ring was bowed in the middle, I put them on the right sides and it got a little better but still has a slight wave. I guess I am going to pull the out and see how they do.
  18. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    I am trying to find two more like new tires so I will have 4 with 100 % tread, Do they ride as good as a retail 37 inch tire?
  19. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    Yea, I am going to lower it some how, the stock yj springs I picked up were no match for the weight of the cummins so I had to put the 4 inchers back on so I could get the tires on. Prob drop it at least 3 inches before its over with. No spacers front or rear, The front tires are brand new...
  20. gaducker

    1983 Restore in Ga 4bt cummins goin in now

    ALOT higher, 6 inches soa and 2 inches of tire, went to soa and from 33 inch tall tires to a 37 inch tall tire.
Back
Top