• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. joshvt

    Local Cars and Coffee and 5 CJ8s!

    My folks live in Wilmington. Love it down there. I recently bought a back seat off a guy named chuck who has a blue scrambler. Might be that one next to the red one? I didn’t meet him- my dad picked the seat up for me- seemed like a real nice guy and had another scrambler he was doing a...
  2. joshvt

    Local Cars and Coffee and 5 CJ8s!

    That’s cool. Where in NC are you?
  3. joshvt

    Heater box foam

    That probably works for the flap seals, but it’s I don’t think that’s what you want for the firewall seal. From the McMaster Carr description: “...Foam has open-cell construction, which allows water, air, and gases to be absorbed.” Since this foam is exposed to the engine compartment, I...
  4. joshvt

    Heater box foam

    Other posts I read recommended a 3.75” holesaw for the bigger motor. Seemed like it was going to be tight so to give myself more room for error I used a 4” holesaw. It was larger than necessary, but gave me some room to get everything lined up. I don’t think that seal would span the 4” hole...
  5. joshvt

    Heater box foam

    Wish I had know that- would have saved me some time. When you remove the metal bands Do you still have to enlarge the fire wall hole? What are those metal bands for anyway?
  6. joshvt

    Heater box foam

    Are you sure that works for the blazer blower motor upgrade? The blazer motor seemed like it would be a good bit larger in diameter than the stock motor, even with the metal collar removed.
  7. joshvt

    Heater box foam

    I just finished rebuilding my heater box this weekend. Did the blower motor upgrade and wasn't happy with the foam mentioned on the other forum for the piece that seals the motor where it goes through the firewall. Check out minicell foam used by kayakers. It's very similar texture to the...
  8. joshvt

    Heater core

    I am in the process of replacing heater core and rebuilding my box with blower upgrade. I searched extensively for a replacement and debated going aluminum but ended up deciding the reviews scared me. The shop that rebuilt my radiator has it now and had to order a new brass/ copper core that...
  9. joshvt

    Barcode on radiator housing

    What is the significance of the barcode on the radiator housing behind the drivers side headlight?
  10. joshvt

    rebuilding a D 300

    my D300 leaks as well- especially in 4wd. How hard are these kits to install? I haven’t done any gear or transmission work, but am interested to learn.
  11. joshvt

    Cleaning up Wiring After Nutter Bypass- trivia/ help needed

    Black box and idle relay eliminated. Coil wire branch to diagnostics plug eliminated as well. Jeep starts and everything works. Woohoo. The diode assembly (pic attached) connected to the idle relay, the 6 pin connector and a couple other wires that i cut earlier on. More wires than were are...
  12. joshvt

    Cleaning up Wiring After Nutter Bypass- trivia/ help needed

    Thanks. I have been through the “adventures under the hood” website in detail- it’s interesting. Have looked at the wiring diagram before attempting to figure some of this stuff out. I don’t see the mystery black fuse box looking thing or the 6 pin connector?
  13. joshvt

    Cleaning up Wiring After Nutter Bypass- trivia/ help needed

    Thanks for responding- Understanding electrical systems is not my strenghth so this is helpful. My scrambler is a n '85 You confirmed a few of my assumptions (choke wire, ignition wire splice and manifold heater relay). After searching many forums, I think the other relay is for the idle/...
  14. joshvt

    Cleaning up Wiring After Nutter Bypass- trivia/ help needed

    I finally got around to doing the nutter bypass. I now have MC2100 and all unnecessary vaccum lines, etc. removed. I am now working on cleaning up and removing the wiring associated with the computer. Working backwards from the computer plug and diagnostic plugs, I have been tracing and then...
  15. joshvt

    Headlight Upgrade - Speedway Motors Relay Kit AND New Doorman Aiming Mounts

    The speedway kit install was simpler than expected and took less than an hour. I tried it with my stock bulbs first just to see if it made an improvement- and it did. Adding the Hella’s made it that much better.
  16. joshvt

    2.5” vs 4” lift

    I am on BDS 2.5” with BFG 33’s. (Actually 32.5”). No complaints about the ride, but this is my first scrambler so no basis for comparison other than stock.
  17. joshvt

    What's on your Work Bench?

    I have one of these grip tapes that is precut- the P.O. gave it to me when I bought my Jeep, but I have never gotten around to sticking it on. I could scan it and send you a full scale PDF, if that would help?
  18. joshvt

    Any Jeep pics you want to share?

    I enjoy this thread as well- mindless Jeep entertainment. Always a happy to see a subscription alert
  19. joshvt

    Steering Box Bracket Bolts

    Completed steering bracket and install of new ps hoses today after slowly working on breaking all of the bolts free when I had time over the past week or so. Ended up pulling the radiator to get to the hose fittings.- can’t imagine doing replacing them with the radiator in place. The...
Back
Top