• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. RMNP CJ-8

    Transmission torque reaction bracket question

    Am I correct to assume that I can use my existing torque reaction bracket from my T-5 for my FT-999 transmission when swapping them out? I have the upper support and only need the piece circled on the diagram. Thanks
  2. RMNP CJ-8

    Where to find a rear cover/tonneau?

    I'm sure B-D company would make just the Tonneau if you request it. http://b-dco.com/cj-8-scrambler-half-cab-w-tonneau/
  3. RMNP CJ-8

    Transmission Identification

    That's great information! I'm not sure why it is missing the first two numbers, but everything else matches up to confirm it is a 85' 999. The splines go out to the end of the shaft which also confirms it's the non-LU version. Any clue to the meaning of the other numbers?Thanks!
  4. RMNP CJ-8

    Transmission Identification

    That's good to hear. It's looks like this might be the cleaner and easier option. It is hard to find all the OEM parts needed.
  5. RMNP CJ-8

    Transmission Identification

    I have been looking online and wondering if I would be better using some of the after market solutions for my column shift linkage and the kick down. Does anyone have experience with these? https://www.summitracing.com/parts/idt-2801750010/reviews https://www.summitracing.com/parts/lok-kd-2727ht
  6. RMNP CJ-8

    Transmission Identification

    Thanks! Rudy's pictures will be helpful. I may have to give him a call. I will also have to get some of those other items. I don't want to start until I'm sure I have everything. I hate to have it out of service while I search for parts.
  7. RMNP CJ-8

    Transmission Identification

    Thanks. The splines go all the way out so I'm guessing it's a non-lock up. I have a automatic tilt steering column I will be using. I still have to get a new floor plate for the auto. I don't want a floor shifter.
  8. RMNP CJ-8

    Transmission Identification

    Thanks. Do you know if anyone makes the circled part as aftermarket or will I need to find one of a vehicle.
  9. RMNP CJ-8

    Transmission Identification

    Thanks Randyzzz! Yes, those are pictures I took of my Scrambler a few weeks back when it got a little warmer. I was itching to take her out after I finally got some original wheels and my tire rack put on. It was up in Rocky Mountain National Park. It's a nice little drive up to Estes from...
  10. RMNP CJ-8

    Transmission Identification

    I picked up the transmission today. He had some linkage and coolant lines but no driveshafts. I am still trying to gather all the parts I will need for the conversion. I think I may be missing some parts of the linkage. I believe there is a bracket for a balancing point that mounts over the...
  11. RMNP CJ-8

    Transmission Identification

    That would be great! I am curious what you are able to find. The owner said it came of an 85' CJ-7 with a 4.2L that was being used as a snowplow in Idaho Springs, CO.
  12. RMNP CJ-8

    Transmission Identification

    Thanks, I'll start googling about the end of the shaft and see what I find.
  13. RMNP CJ-8

    Transmission Identification

    Thanks, I'll see if I can measure the front driveshaft from the donor vehicle and compare it to mine.
  14. RMNP CJ-8

    Transmission Identification

    I also plan on using this in a conversion. I will be taking out my T-5 to convert it to an automatic. Does anyone know it it will require me to get different drive shafts? It is going in my 84' Scrambler.
  15. RMNP CJ-8

    Transmission Identification

    I was hoping someone could help me get a positive ID on a used transmission I am getting ready to buy. The owner believes it might be a 904 but the 999 looks very similar. It came off a 85' CJ-7 that was behind a 4.2L 258. I realized most transmissions behind this engine in the CJ's are 999's...
  16. RMNP CJ-8

    Full Soft Top-Spice

    I contacted B-D Company regarding the 1/2 soft top they offer. They will also sell the 1/2 cab top on its own. The cost for half cab top with hardware is $1685.00. If anyone is interested they also sent the installation guide they provide with the top because I wanted to see how it is mounted.
  17. RMNP CJ-8

    Full Soft Top-Spice

    I had no idea so many people had connections to the area. My great-great grandfather was a saddle maker in Littleton before he was killed by a train in Union Station. I was here to help for the flood and the fire the year before working at the Sheriff's Office. I have a couple acres up in Estes...
  18. RMNP CJ-8

    Full Soft Top-Spice

    Wow, You lived just down the street from me. I hike coyote ridge all the time and have lived off Taft and 37th since 2000. I'm curious to see how the mount the top and tonneau. I hate to drill more holes than I need too.
  19. RMNP CJ-8

    Full Soft Top-Spice

    I live in Loveland just north of Denver. I'm going to call them and see if I can look at the top installed on an 8 if they have one and see if they can make one with a modification. I really don't need a tonneau cover, so I hope they will sell the top only.
  20. RMNP CJ-8

    Full Soft Top-Spice

    I know I emailed them a while back and asked if they made a 1/2 top and never got a reply. I have never seen it listed on their website as an option or price on their website, only the full top, until just now. It says they will not work with a roll bar mounted belt and only with hard doors. I'm...
Back
Top