• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Search results

  1. surfjeepzx

    TJScrambler - Getting Started

    Looks like it's all coming together nicely. There's light in that tunnel! You may want to leave the poison spider rocker guards on while you swap in the floors initially. I think they would make nice braces for the tub in addition to whatever else you set up. Then once the floors are in you...
  2. surfjeepzx

    The beginning.. the end.... and a fresh start

    Thanks, and yes it just fits in the garage!
  3. surfjeepzx

    The beginning.. the end.... and a fresh start

    I think the top is done I've been lacking on updates lately but that's because I haven't been doing much fix it up stuff to the Jeep. I finally got my boat done and some needed around the house stuff too. So today I decided to tackle the Bimini top loose ends and get that done. I painted...
  4. surfjeepzx

    First Jeep rebuild - 81

    Nice work and it looks like you're making good progress. I wouldn't sweat the wiring. When you get to that point and start plugging it all back in it will clean up nicely. The one thing I would recommend is to make bonding jumpers from the battery negative to body, body to frame, body/frame...
  5. surfjeepzx

    Fuel Line Routing to Fuel Pump - AMC I6 to AMC V8 conversion

    Yipper But since you're already covered up the idea you have with routing around the front is exactly what I ran for more than 20 years while the mechanical pump was still installed. Also check out my build thread. I did the electric pump swap and it's all visible with some good pics
  6. surfjeepzx

    Power Steering fluid Leak

    There should be no leaks anywhere in the steering system. Your leak is where the steering shaft mounts to the Input shaft of the "gear box" It's what you see from the drivers side fender looking down. Looking up from the bottom the arm you see is the Pitman arm and that is connected the...
  7. surfjeepzx

    Figuring out my stumble

    You are effectively running out of gas. When you give the throttle a bump you are increasing rpm, which increases rpm to the fuel pump lever, which increases fuel pressure. The increased fuel pressure dumps more fuel in the bowl and gives you a little run time until the cycle starts again. A...
  8. surfjeepzx

    Help! Burning up axle bearings.

    Have you removed the diff cover and inspected the gears and carrier? There should be NO reason you're eating up axle bearings. Something else is wrong. With a locker you need to check that there's no block between the ends of the axle shafts. There should be an empty space in that the two...
  9. surfjeepzx

    How can I shade the back seat passengers?

    Get in contact with these folks. That's where I sourced my top and it was well worth every penny. http://www.usatops.us/full-top.html
  10. surfjeepzx

    The beginning.. the end.... and a fresh start

    Welp, got my computer back but now I need my camera back. I loaned it to my buddy for his wedding. It has the pics on it. I probably should have searched on here but I didn't think it was float related, but rheostat related so I just went ahead and bought one. It came with a solid core...
  11. surfjeepzx

    The beginning.. the end.... and a fresh start

    Next week when I get my computer back I have some pics of interest. The fuel gauge has never worked and I finally got around to knowing why. The new sending unit was defective. After ringing the wires and everything checking out I have my answer as to why the resistance reading was always...
  12. surfjeepzx

    Mission Creep

    Using a one inch new bushing vs the stock one is good but I would not add another bushing on top of the oem. If you need lift do it with the suspension. Sent from my LG-LG870
  13. surfjeepzx

    trying to decide on gear ratio

    If the Trans is 1:1 in 3rd I would recommend 3:73. You stated highway driving so that would my choice. If you were in town and off road then 4:10. I have a 360/T176/33's/4:10's. Great set up for in town. Quick off the line and pulls good to 50 but then she wants that 5th gear I don't have...
  14. surfjeepzx

    Parking Lot Gem from the Desert Rebuild

    Very nice and Good Job! Interesting that in the initial planning stages of my deciding on colors I considered the tan like yours but then stayed with copper. Also got a chuckle from the uncut dash pic with no radio or speakers. My dash is in the same state right now. A radio will fill the...
  15. surfjeepzx

    Mission Creep

    Very nice ... and so it begins
  16. surfjeepzx

    Gazzo's Down-under CJ thread

    I used an aftermarket cowl seal and didn't have that problem but the portion that extends upward on the W/S frame is too thin. It stays curled and doesn't lay flat like the OEM seal. Does yours have that same issue? I would think that the seal you have should compress with little effort to...
  17. surfjeepzx

    The beginning.. the end.... and a fresh start

    Very comfortable and they grip you well. You really feel the side bolsters hug you when you're seated.
  18. surfjeepzx

    The beginning.. the end.... and a fresh start

    That waggie was nice and it did get a lot of attention. Thanks for the compliment. Still working out a few minor details but I'm very pleased with the results. I love driving it again too! All the work has been worth it.
  19. surfjeepzx

    The beginning.. the end.... and a fresh start

    Here's lookin at you :huh:
Back
Top