Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.
Looks like it's all coming together nicely. There's light in that tunnel! You may want to leave the poison spider rocker guards on while you swap in the floors initially. I think they would make nice braces for the tub in addition to whatever else you set up. Then once the floors are in you...
I think the top is done
I've been lacking on updates lately but that's because I haven't been doing much fix it up stuff to the Jeep. I finally got my boat done and some needed around the house stuff too. So today I decided to tackle the Bimini top loose ends and get that done. I painted...
Nice work and it looks like you're making good progress. I wouldn't sweat the wiring. When you get to that point and start plugging it all back in it will clean up nicely. The one thing I would recommend is to make bonding jumpers from the battery negative to body, body to frame, body/frame...
Yipper
But since you're already covered up the idea you have with routing around the front is exactly what I ran for more than 20 years while the mechanical pump was still installed.
Also check out my build thread. I did the electric pump swap and it's all visible with some good pics
There should be no leaks anywhere in the steering system. Your leak is where the steering shaft mounts to the Input shaft of the "gear box" It's what you see from the drivers side fender looking down. Looking up from the bottom the arm you see is the Pitman arm and that is connected the...
You are effectively running out of gas. When you give the throttle a bump you are increasing rpm, which increases rpm to the fuel pump lever, which increases fuel pressure. The increased fuel pressure dumps more fuel in the bowl and gives you a little run time until the cycle starts again. A...
Have you removed the diff cover and inspected the gears and carrier? There should be NO reason you're eating up axle bearings. Something else is wrong. With a locker you need to check that there's no block between the ends of the axle shafts. There should be an empty space in that the two...
Welp, got my computer back but now I need my camera back. I loaned it to my buddy for his wedding. It has the pics on it. I probably should have searched on here but I didn't think it was float related, but rheostat related so I just went ahead and bought one. It came with a solid core...
Next week when I get my computer back I have some pics of interest. The fuel gauge has never worked and I finally got around to knowing why. The new sending unit was defective. After ringing the wires and everything checking out I have my answer as to why the resistance reading was always...
Using a one inch new bushing vs the stock one is good but I would not add another bushing on top of the oem. If you need lift do it with the suspension.
Sent from my LG-LG870
If the Trans is 1:1 in 3rd I would recommend 3:73. You stated highway driving so that would my choice. If you were in town and off road then 4:10. I have a 360/T176/33's/4:10's. Great set up for in town. Quick off the line and pulls good to 50 but then she wants that 5th gear I don't have...
Very nice and Good Job! Interesting that in the initial planning stages of my deciding on colors I considered the tan like yours but then stayed with copper. Also got a chuckle from the uncut dash pic with no radio or speakers. My dash is in the same state right now. A radio will fill the...
I used an aftermarket cowl seal and didn't have that problem but the portion that extends upward on the W/S frame is too thin. It stays curled and doesn't lay flat like the OEM seal. Does yours have that same issue? I would think that the seal you have should compress with little effort to...
That waggie was nice and it did get a lot of attention. Thanks for the compliment. Still working out a few minor details but I'm very pleased with the results. I love driving it again too! All the work has been worth it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.