• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

1985 CJ-8 rebuild

tonymoon

Basic User
City
Saint Petersburg
State
FL
I purchased a 1985 CJ-8 earlier this year and after driving it a bit and figuring out what to change to make it mine I began the process. Making it drive and handle better was my first priority so the decision was made to upgrade the steering box to an AGR Superbox 2 & replace the steering shaft to a Borgeson, take the suspension shackles down from 5" to 2" and remove the wheel spacers, which were 5" and repack or replace the wheel bearings. Changing the rear axle's to 1 piece was done after too much play was discovered in the originals. After exploring the engine and transmission (Chevy small block V8 and Turbo 400 auto) metal shavings were found and too much engine damage for my liking so I'm replacing the engine and hoping to keep the tranny. Does anyone have any experience with installing 4.0's, Gen III's or turbo diesels or have any advice for me moving forward? Any suggestions are appreciated. The rest of the Jeep is pretty solid, very little body rust (1 small spot at the bottom of the body below the drivers door & the bottom corners of the windshield) which I'm replacing in it's entirely, frame and glass. Pretty much a daily driver with no plans for extreme off-roading.
 
4.0 is very doable but given how usable and documented the 5.3/6.0 has become, you may want to go that way.


 
Welcome to the forum. :wave:

There are several well documented builds in the "Complete Builds and Restoration" forum.
As stated, there are several documented 4.0 swaps. But since you had a V-8 originally, may not be the best way to go.
As far as the Gen III, "zr10054" has a recent build he did with input from other members.
Not trying to leave anyone out as there are many more great builds in that forum.
You could check with "mysunnshine" to see if he has his for sale still. Doubtful, but who knows? Should be plug and play.
https://www.cj-8.com/forum/showthread.php?41364-4-bolt-main-aluminum-head-multi-port-fuel-injected-SBC-350-COMPLETE&highlight=

Cummins is also coming out with a 4bt swap kit in 2017. All the articles mention the TJ, not sure if it has to use any of the original factory computer components or not. May not be an easy install for a CJ.

Not sure what your budget is, just throwing out some random thoughts.
 
I find it interesting that cummins being careful to distance this new engine from the 4bt; I think the architecture is the same. May be trying do differentiate because of price point. Watched a YouTube sponsored by cummins and AA where they installed in a TJ. Best thing was that total installed weight was 500 lbs (less than a 258). This unfortunately included a plastic oil pan (to save weight) that died on a trail ending their trip. I love the concept of a lightweight, fuel efficient, and 5 wire ready. I'm scared it's going to be $13k.


 
^^ I think your referring to this Cummins?

https://youtu.be/icp2Pb5uoME

b4719986d1da5e1c055bbf13dd71d31dpng-1.jpg


In my view it's not quite an apples to apples comparison. The 4bt is a mechanical, heavy duty industrial motor. This 2.8 has great Jeep potential but is an electronic injected and more complex motor. It can obviously be done and may prove a better choice than the venerable 4bt... time will tell.


 
^^ I think your referring to this Cummins?


b4719986d1da5e1c055bbf13dd71d31dpng-1.jpg


In my view it's not quite an apples to apples comparison. The 4bt is a mechanical, heavy duty industrial motor. This 2.8 has great Jeep potential but is an electronic injected and more complex motor. It can obviously be done and may prove a better choice than the venerable 4bt... time will tell.

Yes, here's a link to some specs.
http://social.cummins.com/introducing-cummins-crate-engine-program-cummins-repower/

I mis-spoke on the 4bt. That is what Bruiser installs for their Jeep diesel swaps.
 
I wonder if an NV4500 is overkill for the lil diesel. I'd be curious to play with a gear calculator and see what kind of MPG you could eek out with enough options. Maybe an NSG 6 speed.


 
Any idea on the Cummins cost? I definitely want to stay with an auto tranny. Not sure if that is an option with the diesel.
 
Any idea on the Cummins cost? I definitely want to stay with an auto tranny. Not sure if that is an option with the diesel.

I signed up for updates from Cummins when they come available, I'll report back, or anyone can sign up.

Here's an excerpt from here:
http://www.4wdmechanix.com/advance-adapters-and-cummins-2-8l-diesel-engine-conversion-for-jeep/

Fully operational and featuring the vehicle’s original functionality, the R2.8L nestles neatly in this Jeep® TJ Wrangler engine bay. The stock 4.0L radiator is able to handle the rated 161 horsepower and 267 ft-lbs of torque, claiming an operating temperature of 177-180 degrees F. The precision machining on the Advance Adapters engine-to-transmission adapter assures a proper fit. Currently, the transmission adapter lineup fits the Ax15/NV3550 and G.M. automatics. Discussion is underway around fitting the Aisin AW4/A340 transmissions common to both Jeep® XJ Cherokee and Toyota truck applications.


The website is going to a video on the swap.

Sure sounds like $$ while be the deciding factor.
 
I've decided on sticking with the 5.7L 350. Doing a stage 2 build through West Coast Engines. Going to replace the wiring harness from A to Z. Any suggestions?
 
Back
Top