- City
- Kitchener
- State
- On
Hey Guys,
I swapped in a 258 6 cylinder engine to replace the original 151 4 cylinder iron duke engine in my scrambler.
I have added pre-bent fuel lines 1/4 fuel return and 5/16 vapour fuel line on drivers side frame rail and was wondering from factory how the lines were oriented 5/16 vapour line on top of 1/4 return line or other way around?
Also regarding fuel return line off fuel filter was curious if anyone had picture of small hard line that went around intake and exhaust manifold down to hard frame rail line? I would like to bend one up that closely matches how it was routed from factory .
Thanks for any help
I swapped in a 258 6 cylinder engine to replace the original 151 4 cylinder iron duke engine in my scrambler.
I have added pre-bent fuel lines 1/4 fuel return and 5/16 vapour fuel line on drivers side frame rail and was wondering from factory how the lines were oriented 5/16 vapour line on top of 1/4 return line or other way around?
Also regarding fuel return line off fuel filter was curious if anyone had picture of small hard line that went around intake and exhaust manifold down to hard frame rail line? I would like to bend one up that closely matches how it was routed from factory .
Thanks for any help