• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

4.2 to 4.9 stroker

ccourtney

Scrambler Enthusiast
Lifetime Member
City
Bridgeport
State
WV
I am in the process of swapping out my 4.2 for a titan 4.9 stroker. I have a 4 barrel offenhauser intake. when I spoke with the guys from titan they had told me that i could retain my 4.2 intake and exhaust manifold. i believe everything lines up well. The intake manifold has a wider offset at its base. It looks like I need some type of bracket to place my bolt through to capture both manifolds. I would appreciate any suggestions. I will attach some pics of the 4.0 and intake. Thanks, Chris
 

Attachments

  • IMG_1024.jpg
    IMG_1024.jpg
    559.1 KB · Views: 30
  • IMG_1023.jpg
    IMG_1023.jpg
    691.3 KB · Views: 41
Thanks, I will give it a try. Do you have any pics of your modification? Thanks for your time.
 
If I am not mistaken, the 4.2 intake will be OK but you will need a 4.0L Header on the 4.0L Cylinder Head. I am using a JBA header that lined up perfect for the 4.0 head and has the single 2 1/2" outlet.

I also machined the bolt flanges on the intake manifold to match the thickness of the bolt flanges on the header. Really not that much was taken off at all and plenty of metal left on intake as well. Therefore I can use the stock studs / bolts and the stock style washers remain flat and keep the original look.
 
Last edited:
Sorry been busy and haven't responded. You can see one of the modified brackets in this photo.

leftengine.JPG

rguest3 is correct. you need to use a 4.0 header, but you can use the 258 intake. I had to modify the tab that fits on the alignment dowel, and adjust the intake up to fit properly. I was worried that I may have issues with an intake leak, but it runs great.
 
Back
Top