• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

AM/FM/CB Antennas...?

Gueon

Scrambler Junkie
Lifetime Member
City
Thatcher
State
AZ
Does anyone have a good photo of an original AM/FM/CB antenna that was used on Jeeps? I am trying to source an antenna and would like to find something as close to original as possible... better yet, does anyone have one they would like to sell? :rolleyes:
 
I have one somewhere. I'll try to find it. I believe someone has one mounted on their jeep on the site.
 
[emoji10] [emoji10] [emoji10] [emoji10]

Sent from my SM-N910P
 
I know this isn't a good pic, I'll have to get a better one when I get to the shop.P1000579.jpg
 
Here's a better pic of the scramblers antenna.20160304_123946_resized.jpg20160304_132647_resized.jpg

Pulled the antenna to clean up and mount on new cj8 and found a little too much pitting to install at this time. What are others installing?
 
Mine is for a regular am/fm radio. If used for cb it would need the splitter box to tune the cb and antenna together like BRKLYNZ mentioned.
 
I went to my stash and here is a picture of a cb ant spliter. . This is from a fsj the cj one is a little different but it does the same job. Both get outputs go into that box and then to a special antenna that i dont have.i hear it takes a case of end caps to get one. There was a picture of one a few months ago on a amc radio display someone bought. But i forgot who it was. The base of the ant is black and rounded.
3113e57e714e52e6b9233435d2f1b038-1.jpg


Sent from my SM-N910P
 
T
I went to my stash and here is a picture of a cb ant spliter. . This is from a fsj the cj one is a little different but it does the same job. Both get outputs go into that box and then to a special antenna that i dont have.i hear it takes a case of end caps to get one. There was a picture of one a few months ago on a amc radio display someone bought. But i forgot who it was. The base of the ant is black and rounded.
3113e57e714e52e6b9233435d2f1b038-1.jpg


Sent from my SM-N910P

That was me, I bought the radio. What I am unsure of is whether you need a "special" antenna to use with the splitter or if the regular antenna will work if used in conjunction with the splitter... I want to make sure I don't fry the radio if I hook it up without the right antenna. That said, I would prefer to have good performance so if a regular CB antenna is better, I'll do that instead.
 
Yes you will fry the cb if you use regular ant..a firestick would do best or whip But they never came as a option if your doing original equipment. Period correct would be a whip mounted to the rear. But you would have to drill a big hole.. [emoji33]

Sent from my SM-N910P
 
Yes you will fry the cb if you use regular ant..a firestick would do best or whip But they never came as a option if your doing original equipment. Period correct would be a whip mounted to the rear. But you would have to drill a big hole.. [emoji33]

Sent from my SM-N910P

Where exactly would it have been mounted, and what did the whip look like? Thx
 
This is what i use. It mounts to the tire stop in rear so no holes have to be drilled. Clean look and you can take the antenna off when not in use..
ff7034075c3e298a6d22b0faf6faa09c-1.jpg


Sent from my SM-N910P
 
Not factory, but this is how I mounted my 2 meter and CB antennas. I have a fiberglass body, so the antennas are straight to the frame mounted bumper.

uploadfromtaptalk1457192770558.jpg

Sent from my SM-G900V
 
Back
Top