Amber Side marker led replacement upgrade recommendations

[gr8dain]

The lights have built in LED lights in the side for side markers. They have no plate light. I used LED lights that look like bolts in the top 2 holes in the license plate

Thanks

 

[mysunnshine]

I like my Savvy tail lights but the anodizing goes away pretty quickly unfortunately-

 

[Doc Savage]

I tried the replacement LED bulbs in my stock socket. Depending on how the light is wired, you get either just the blinker or just the marker (and mine were wired to where each side was different). I ended up getting a set of these https://www.amazon.com/dp/B00Y3J485C/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=O1NUQCYM56PJ&coliid=I25GAI29MQUELU and mounting them just above the stock lens. I wired the socket for turn and the stick ons as marker lights.

 

[Falkland9]

You will also need different flashers to make the LEDs work right. I used a flasher from NAPA designed for LEDs that has a wire that needs to be grounded. I also had to reverse the terminals on the 4 way because it was wired opposite so the flasher would not work

 

[Jeepnyak]

The side marker lights are 35552 from LEDlights the rear lights are from Savvy off-road and are billet aluminum

What about the parking lights that are white, then amber?

 

[Falkland9]

They are called switch back bulbs. Those I got on eBay