• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Anyone running GM 6.0/4L80E ?

oldyellowcj

Legacy Registered User
City
Sharpsburg
State
GA
I came across at what seems to be a good deal on a complete 2002 Chevy truck with the 6.0 L and 4L80E 4wd transmission. This really got the gears turning for a swap in the old Scrambler.
Anyone running this combo? The 4L80E is longer than the 4L60E but doesn't seem to have the clearance issues on the front driveshaft.
 
I'm not running the 6.0 I run a 4.3 out of 2002 and I went back to the good old turbo 350. It works really well for me
 
I havent put a 4l80 in a jeep, but I have worked with them in other stuff. I put one behind a fire breathing 6.0 in a 63 vette....
Here is what the two look like side by side on the floor:
p129013_image_large-1.jpg


The 4l80 is longer, wider and heavier. The housing is slightly "flat-er" on top just behind the bellhousing which can help with tunnel clearance in some applications. I dont know as though it provides any benefit to driveshaft clearance on a 4x4.

But, like I said, I havent tried it either. I have tried the 5.3/4l60 and it worked great. Really great in fact.
 
Back
Top