• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Automotive Chains

GooserPSU

Gooser
City
Harrisburg
State
PA
Hello everyone,
I finished up replacing my front wheel bearings, brake master cylinder, front rotors, and calipers. When I went to install the calipers, I noticed the ones that Autozone gave me were WAY too big. I believe the PN was C528 and C529 (left and right). Same PN as Pepboys. Also, the Master Cylinder was different as well with a much larger bore.

After doing research with them, it was discovered that the CJ-7 calipers, and master cylinder were the ones I actually needed. But the parts they had listed for the CJ-8 were different PNs...

Anyone experience this? From my understanding, and I'm probably wrong here, the CJ-7 and CJ-8 were pretty much identical minus a few driveline changes, and the obvious frame and body.
 
I've swapped the engines in both of my CJ's with 4.0's. When I went to replace the accelerator cables I found the same thing. Parts stores had one listed but it did not fit my vehicles. My engines came out of Cherokees but the cables turned out to be the ones used on Grand Cherokees and not the ones listed. I don't remember how we figured out which one was right but it took some research.
I found the same thing with water pumps. The one listed for my engines was not the same as what was put on at the factory. What I'm running in both Jeeps is the one listed for a Grand Cherokee, but I'm sure the engines came from Cherokees. :shrug:

Years ago a friend told me the guy at a parts shop tried to sell him a square headlight for his '86 CJ7. The guy insisted the sqare light was the right one because he was looking at it in the catalog. :huh:
 
Where do I start? I have an 81 Scrambler that had narrow Trac axles. I swapped the rear to a WT Dana 44 from an 86 CJ7. Front axle was swapped to a WT as well. Engine is a Chevy 350 from a 78 Corvette, etc., etc.

I always have parts problems as you may imagine. However, the biggest problems of all, were in fact the brakes! First set of rear shoes O'Reilly gave me were 11" shoes, but I have 10" drums. Then they gave me he wrong spreader bars. Then I got the wrong adjusters. Then I had major issues with E-brake cables. You name it but I had big brake part problems, and there's a huge difference in all of them. I've found lately, that I just tell them I have an '86 CJ7- even though the parts guys all know I have a combination of everything.

I've also found that NAPA seems to have a better quality part in many cases, versus the other chains. Not only in appearance, but also in mechanical quality.

I started a notebook that lists all my brands and part numbers so that in he future, I will just order replacement parts from actual part numbers.
 
none of the chains list the right part number for the oil filter on my S2000. The little computer at walmart has it wrong too...i finally put the number in my cell phone so i could remember to get the right one...at oreillys the wix number is right but all the rest show the wrong one... :shrug:
 
I've wound up keeping the part of the packaging with the part # on it for future reference. In my console there's one for wiper blades, accelerator cable, fuel pump, fuel filter, water pump...
 
Back
Top