• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Axle swap

JM1914Tn

Basic User
City
Knoxville
State
Tn
Hey fellas! New to the CJ-8 forums. I'm thinking about doing an axle swap fro my 81' Cj-8, wanting to spring over. It currently has the narrow axles, dana 30 and amc 20. I am considering either IH scout 44's to spring over and have heard problems about welding to the housing, wondering if there are an other pit falls with these axle.I Am also considering FSJ Dana44s out of a Cherokee that i found at a junk yard. The Cherokee axles seem to be in decent repair, etc. I know the Cherokee axles will be wider(10") and the Scout axles will be slightly wider( 3") than wide track Cj axles. Want pitfalls, if any with the Cherokee axles/ Was wondering if i'm going to all this trouble what the best option would be. I know hindsight is 20/20 so i was hoping someone could shed some light. Thanks:D
 
Welcome to the forum. :) If you use the Search function, you'll find all kinds of information about Scout, Waggy & other axles (along with the pitfalls of each).

Craig
 
Thaks

Thanks for the post, I have already come across another thread that helped me. Keep'em coming.:D
 
If you expect to own the Jeep a long time, just go straight to Dana 60 Axles.
You will save THOUSANDS in the long run.

Yes they seem "big" and are often referred to as "Overkill" but they really are the shizznit. :D

Oh yeah welcome to the board

bananaWrenchgif-1.jpg
 
Last edited:
if you are just going to swap in a dana 44 you might as well just keep your amc20, weld it, truss it, and of coarse 1 pc axles. i think this set up is as strong if not a little stronger than a dana 44. (some may argue that). otherwise i would go dana 60.
 
I'm in the middle of an AMC 20 rebuild. Will post pics later on. I chose the superior 1-piece axles shipped for $260. Comes with all the seals and such. Got a near new Lockrite lunch box locker for $175. Bought the material to do the truss for $15. Now its almost fab time. I will weld the tubes and the truss. I'm making it out of 2 plates like a T on top of the the tubes at an angle running form the tube up to the top of the pumpkin. It seems like an easy way to do it and the T will be strong.

I looked into a D44 off a Cherokee from a junkyard. It would have been over $500 with almost 100k miles on it so it would need rebuilding soon enough too. I do hear the D44 breaks are better but not $250 better. I agree, either rebuild the 20 or go to a D60.
 
I'm confused how the Dana 60 recommendation(s) came without any more information on the intended use of the Jeep. IMO, they're not going to be the answer for everyone.

This Rear Axle Swap FAQ may help some. Good luck.

Craig
 
First thing I would do is determine what size tire you wanna run. That, in a nut sheel will help determine almost every other decision during your build. Tire size will determine how wide you should make it, how much power,axle ratioetc.etc.etc. Once you determine what size of a rig you want in the end, spend all your dollars towards that goal instead of doing one thing now and saving to do another later. Spend the money once to end up with what you truly want and it will cost you way less than trial and error methods. Ask alot of questions. There is a wealth of knowledge on this board and most people are more than willing to share it with you.
 
since he was wanting to swap in dana 44's i assumed he already knew the limitations of the axle and had a tire size & etc. already figured. i was just tryig to point out if a dana 44 will work for your application then you might as well save some time and money and keep the axles he already has and just upgrade shafts and what not. i could be wrong, i'm just trying to act like i know something;)
 
Back
Top