• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Carter carburetor - running too rich?

DRdalequail

Basic User
City
San Angelo
State
TX
Been working on my '81 258; pretty sure it has Carter carburetor on it (how does one know for sure?? Post a picture?)

Starts and idles well but tends to stall at about 35 mph and considerable black smoke. I swapped spark plugs and it's better but still think it's running too rich. Spark plug tips with moderate fouling.

How does one adjust the fuel mixture on this carburetor?
 
Here are several pics of the carb, and I found it was indeed a Carter. And some pics of supporting evidence for my flooding problem. (Well I see now where I can only attach one pic at a time so multiple posts coming.)

Thanks in advance.

DR
 

Attachments

  • carb.jpg
    carb.jpg
    74.7 KB · Views: 13
See pic of old spark plug and exhaust "trail" on concrete as evidence of too rich a fuel mixture, correct?
 

Attachments

  • exhaust trail.jpg
    exhaust trail.jpg
    62.3 KB · Views: 6
My choke plate sometimes closes completely and probably cause of flooding. This pic shows position of choke plate when idling . . . does that look about right?
 
Also, see this apparatus (part of the automatic choke?) at tip of screwdriver. I removed a bunch of vacuum lines, but don't recall pulling this one. Is it critical? (Needs to be plugged I presume?)
 

Attachments

  • vacuum fitting.jpg
    vacuum fitting.jpg
    61.3 KB · Views: 15
Old spark plug showing fouling. What else can one discern from appearance of spark plug??
 

Attachments

  • old spark plug.jpg
    old spark plug.jpg
    46.4 KB · Views: 5
pull the top off your carb and pull out the venturi assembly. Drill the tubes out to .032" use a #67 drll bit I believe. You will be much happier with your jeep
 
Back
Top