• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Cleaning inside the frame

CJocho

CJ-8 Member
City
CHICAGO
State
Il
Fellas,

I just cleaned out the inside of my Scrambler frame and thought everyone might benefit from the lessons I learned.

1. Get your frame vertical if at all possible. Gravity helpled so much in getting the larger pieces of rusted metal moving to where you can get them out.

2. Use a kit designed for cleaning a dryer vent. I had to modify it a bit to fit the frame and it worked really well.

3. Occasionaly use compressed air to get pieces and particles moving down the frame.

4. Be patient. The entire process took a couple of hours but well worth the time if you are going to spray some kind in-frame rust encapsulator.
 

Attachments

  • 20180702_111734.jpg
    20180702_111734.jpg
    149.6 KB · Views: 123
  • 20180702_143931.jpg
    20180702_143931.jpg
    131.1 KB · Views: 123
  • 20180702_111734.jpg
    20180702_111734.jpg
    149.6 KB · Views: 118
  • 20180702_111752.jpg
    20180702_111752.jpg
    145 KB · Views: 118
  • 20180702_110038.jpg
    20180702_110038.jpg
    223.4 KB · Views: 122
  • 20180702_111709.jpg
    20180702_111709.jpg
    121.4 KB · Views: 126
  • 20180702_145323.jpg
    20180702_145323.jpg
    242.1 KB · Views: 121
Yikes. That's a lot of crap.
 
That is a great idea but I have this vision of that frame sliding down the wall and making a bunch of racket. I removed the rear cross member and that made a big difference in accessing the frame from the inside all the way to wheel arches. Then I bought the one from "CHIEFWAHO", and welded that to the frame. Well worth the effort.
 
Last edited:
Good stuff. Thanks for sharing
 
Back
Top