• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Drain Hole in Bed and Gr8tops Jeep Jacket Qs

orange150

Basic User
SOA Member
City
Fairfax
State
VA
Should I drill a drain hole in the rear corners of my bed?

I'm also interested in one of those Gr8tops "Jeep Jacket". Anyone have them with any experience? Worth the money? Their website doesn't have much info on it. I'd like to go ahead and get it ordered if it's worth it.

IqBkfoZpng-1.jpg


Thanks!
 
I have the rain gear one and it is awesome. I have to store my scrambler outside and the only minor problem is that with heavy rain there will sometimes be a pool in the back (which is usually my own fault for not tying down the back straps tight enough). I would highly recommend one. It is easy to put on and take off with Straps that hook on to the body in the right places. I have a thread on here someplace where I asked the forum for advice and a bunch of people recommended that type of cover. I can take some pictures of it on mine tonight or tomorrow if that helps.
 
So what's the difference between the two, Gr8tops and Rain Gear?

I also found the drain holes in the bed.. Haha, can you tell I'm new to these!
 
So what's the difference between the two, Gr8tops and Rain Gear?

I also found the drain holes in the bed.. Haha, can you tell I'm new to these!

From what little experience I have with this, I would expect some of that water you show in the picture to drain out between the seems of your tailgate. I know that some people have put a seal or weather stripping around the entire tailgate but it shouldn't be that way. If that's the case you may want to look at getting the proper rubber bumpers for the tailgate vs the full seal. That will help it drain better too.
 
Last edited:
Orange it looks like the gr8 top one hooks up underneath while mine hooks up to the front by the wheel well ( which can bend the flares).

Here are some pics of how it fits. I also made a makeshift 2x4 rib down the back so no water pools in the back. Good luck!

ImageUploadedByTapatalk1397944320.457772.jpgImageUploadedByTapatalk1397944331.729441.jpgImageUploadedByTapatalk1397944339.978266.jpgImageUploadedByTapatalk1397944357.844348.jpg
 
Back
Top