• Notice for iPhone users: DO NOT use the image size reduction option when uploading photos to the forum. This causes portrait images to post as landscape. We have added a warning to the image insert pop-up as well.

Extra orange wire w/ connector

lslane

Basic User
City
New Braunfels
State
TX
Hey fellas, After installing new fenders and grill I am connecting my light harness, horn, etc back as it was. It has been so long I cannot remember where one lone orange wire with a female connector resides. It comes from the wiring harnes containing all the front lights and the red horn wire. It exits the harness right before the red horn wire. I forgot to take a pic today. Any advise is appreciated.
Moose
 
Can you locate it back at the bulkhead connector?
Sounds like the orange factory prewire for fog lights.
 
Thanks I will trace it back to firewall. What would I expect to see? Would I trace it back to fuse panel.
 
Thanks I will trace it back to firewall. What would I expect to see? Would I trace it back to fuse panel.

The orange wire passes through the bulkhead connector as orange on the inside.
It possibly goes to a loose 4 wire connector under the dash.
It should be in the "CS" position of the bulkhead connector inside the cab that is highlighted in the image below.

fog.PNG
 
It could also be the under-hood light connector, that is orange under hood and has single female connector on it. It goes to DY location on the bulkhead connector picture FLC posted.
 
I meant to add, it could be the 4wd indicator light wire as well. That would be orange and have a round female connector on end (as opposed to spade type). It would go to EZ location on diagram FLC posted.
 

Attachments

  • 549937d1359061131-bulkhead-firewall-wiring-harness-diagram-firewallplugdetails.jpg
    549937d1359061131-bulkhead-firewall-wiring-harness-diagram-firewallplugdetails.jpg
    79.3 KB · Views: 75
I meant to add, it could be the 4wd indicator light wire as well. That would be orange and have a round female connector on end (as opposed to spade type). It would go to EZ location on diagram FLC posted.

Much better image, and with details. :woot:
 
Is it orange, or is it yellow? It could also be the washer pump.
 
Is it orange, or is it yellow? It could also be the washer pump.

It is orange. It is further down the harness than the yellow washer pump wire. I have decided it must be something to do with the cruise control servo. I do not use nor does it function anyway. I have had a hard time finding a wiring diagrahm with the servo in the diagrahm.i did find the color wiring chart on this forum and had the print shop enlarge and laminate it. I printer a b&w one 36x48 on the plotter at work for the wall at my shop! So thanks to who ever posted it origanally. Awesome.
 
Back
Top